HiSec 10

The portal is motorised, driven by geared Brushless DC motors regulating the speed of movement. The safety of the user is ensured by monitoring the presence within the area and safety torque sensing of the drive.

Materials
Structure: Mild steel powder coated finish, RAL colour 9006,FB3- EN1522
Glass: BR1/S, P4A- 12mm Laminate Safety Glass, EN1063/356
Ceiling: Laminated HPL finished Pearl Grey
Base Plate: High-strength laminate with finishing in colour Plumb Grey
Sliding door: Aluminum frame, RAL 7040
Light: A low voltage light is positioned internally on the ceiling

Technical Specification

Power Supply 230-240 Vac 50-60 HZ
Power Rating 230V AC - 1,4 A/115V AC - 2,8 A
Logic voltage 24V DC
Operating Temperature From -10° to 45°
IP rating/ MCBF/MTTR IP33/2M cycles / less than 30 min
Flow Rates (approximate figures): Proximity Reader: ” Hands Free”, 5 passages per minute

Power Failure / Fire Alarm
In case of power failure, a battery back-up will allow approx. 20 passengers after which the entry door is unlocked (Fail Safe) allowing it to be manually opened by anyone inside the HiSec2. While the exit door remains locked (Fail Lock) to ensure protected access to the secure area.

Options

Extended Passage Height/ Cornice Height
Ballistic Resistant Glass- BR2/S, BR3/S, BR4/S, BR4/NS, BR6/NS - EN1063
Heating Kit -15°C
Ballistic Resistant Structure- FB4, FB6- EN1522
Semi-external installation
Manual Attack Resistance- RC2, RC3, RC4 - EN1627 (Not available with Metal Detection upgrade)
Left object sensor
Active Infra-Red Sensor
Ultrasound sensor
Integration of Card reader/ Pictogram
Double Contact mat
Demountable version
Weight Sensing Upgrade
Maintenance Access from Ceiling
NCI
Alternative finishes- Custom RAL colours, Stainless Steel
Emergency Button
Metal Detection

Single Person Detection - Optional upgrades available:
1. Ultrasound
Detection via high-frequency waves. Permitted access only when the volume present in the portal is within the configured threshold.
2. Double Contact Mat
Digital detection based on the limitation of space. The mat has two zones, with one small inner zone. If pressure is applied outside the inner zone, passage will not be permitted. Can be combined with Ultrasound.
3. Weight Sensing
Detection via load cell. Weight is used to decide whether to accept or reject passage. 3 modes available: Maximum weight mode (standalone), weight banding mode, and actual weight mode (integrated with access control). Can be combined with Ultrasound.
4. NCI
Unique advanced image analytics, AI and a dual camera system. Detects and counts the number of people inside the portal. This standalone system ensures passage of one person only without being affected by other items inside the portal e.g bags, wheelchairs.

Active Infra-Red Sensor- (Optional)
Detects presence at the entry of the booth to allow free opening of the entry door if required.
Left Item Detection
An additional left object sensor is able to detect the presence of a metallic object of the size of 50x50x30mm left inside the portal. 
Reader Integration (optional)
Readers can be located on the interior and exterior of the booth, allowing a single or two-factor authentication process. A confirmation signal is also given to affirm the completion of the passage.