Опубликуйте свои продукты
ZINC cladding - VMZINC Standing seam facade
ZINC cladding - VMZINC Standing seam facade
ZINC cladding - VMZINC Standing seam facade
ZINC cladding - VMZINC Standing seam facade
ZINC cladding - VMZINC Standing seam facade
ZINC cladding - VMZINC Standing seam facade
ZINC cladding - VMZINC Standing seam facade
ZINC cladding - VMZINC Standing seam facade
ZINC cladding - VMZINC Standing seam facade
ZINC cladding - VMZINC Standing seam facade
    VM BUILDING SOLUTIONS

    ZINC cladding - VMZINC Standing seam facade

    The standing seam technique of VM Building Solutions, is particularly suitable for very large facade surfaces and for structures located in regions of harsh climate, which are often subject to strong winds, heavy rain and snowfall (mountain or continental climate).

    The low height of the seams (25 or 32 mm) contributes to the modernity, lightness and regularity of the facade, while highlighting its architectural purpose. When dealing with more complex designs this system presents a more technologically advanced appearance.

    Key advantages:

    Traditional system widely used throughout the world,

    Flexibility and discreet joints making it suitable for every architectural design,

    Maximum wind resistance,

    Fast and easy installation making it a cost effective solution.

    Surface aspects: Natural Zinc / Bilaquered Zinc/ QUARTZ-ZINC / ANTHRA-ZINC / PIGMENTO / AZENGAR / Perforation on demand.


    Cпецификация
    • Areas of application:

      All types of façade surfaces.

      All shapes: flat, curved, concave, convex, conical, domes.

      Support
      The support must be :

      - Rigid and continuous.

      - Meet loading requirements in conformity with a minimum pull out strength of 50 daN for each clip.

      - Rest on at least 3 bearing structure elements.

      - Have no protruding elements on the support.

      Installation: 

      Lay in long sheets up to 4 m vertically and 6 m horizontally. 

      Finishe joint: Height 25 mm, thikness 5 mm

      Fixing: 

      Fixed and sliding stainless steel legs (type VMZINC), type 1, placed every 33 cm and crimped with statements from the cladding tanks. 

      Weather conditions : All regions wind

      Packaging: 

      Profile rollers or performed strips on request.

      The choice by a professional of a VMZINC product adapted to the environment of a building must integrate the possible constraints of use according to the aspect of surface considered. Each aspect of zinc surface can evolve in time differently depending on the type of environment (seaside, high UV exposure, snow, etc.) and according to the applications (cover, facade, rain evacuation).

      The use of the chosen aspect may not be suitable for certain applications in the context of very aggressive environmental constraints

      If your project is higher than 30 meters and/or if it is in an area where wind speed is higher than 170 km/h once a year, please consult VM Building Solutions.

    Техническая спецификация
    • Уникальная ссылкаJoint_Debout_Facade_VMZINC
    • Тип продукцииFaçade
    • Группа продукцииVMZINC CLADDING
    • ТипОбъект (один объект)
    • Дата публикации2019-05-01
    • Номер версии2
    Связанные
    • Основной материалЦинк
    • Вспомогательный материалЦинк
    • Разработано вФранция
    • Страна-производительФранция
    Классификация
    • Категория BIMobjectСтены - Облицовка
    • Классификация IFCВитраж
    • Название по ССКПУ ООНSiding and exterior wall materials
    • Код ССКПУ ООН301518
    • Код Uniclass 2015Ss_25_20_50_95
    • Описание Uniclass 2015Zinc sheet cladding systems
    • Код CSI MasterFormat 201407 64 00
    • Заголовок CSI MasterFormat 2014Sheet Metal Wall Cladding
    • Номер OmniClass23-13 37 13
    • Наименование OmniClassExterior Wall Cladding
    • Код CSI UniFormat IIB2010
    • Заголовок CSI UniFormat IIExterior Walls

    Доступно в регионах:

    Европа
    Франция