Wireless switching, 0-10V dimming, and power monitoring for 480V applications up to 2A
Easy setup - simply power on, confirm device connectivity and call 844-LIGHTCLOUD
Cylindrical design for easy installation at threaded junction boxes
Cloud-based management - no software to install or maintain
Connects to Lightcloud Gateway and other Lightcloud devices
Connects via a secure, encrypted, and self-healing 2.4 GHz wireless mesh network
Repeater Mode to extend range of wireless mesh network
If power to Controller is lost, notification is shown in the Lightcloud application
If communication is lost, Controller can fall back to a customizable emergency state
Cпецификация
Compliance
UL Listed: Suitable for indoor and outdoor use; Plenum Rated.
IP Rating: Ingress protection rating of IP66 for dust and water.
Electrical
Dimming Driver: Includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Can dim as low as 1%. Actual dimming range defined by driver.
Installation: All Lightcloud components should be installed by a licensed electrician following local codes.
Input Voltage: 347/480VAC
Frequencies: 50/60 Hz
Electrical Ratings:
10ma @ 347VAC
10ma @ 480VAC
Load Switching Capacity:
LED, magnetic 347VAC: 2A
LED, magnetic 480VAC: 2A
Wireless Range
Obstructions: 100 feet
Line of Sight: 1000 feet
Construction
Operating Temperature Range: -40°C to 60°C
Storage Temperature Range: -40°C to 80°C
Maximum Relative Humidity: 85%
Mounting: Junction box suitable for indoor or outdoor use. Can be mounted on lighting panel, trough, or fixture.
Wire Gauge:
3x6 in 18AWG 600V
3x12 in 22AWG 600V
Other
Warranty: 10-year full hardware warranty with 100% repair/replacement coverage for all properly installed devices. See Lightcloud Warranty Terms.
Buy American Act Compliance: RAB values USA manufacturing and may manufacture compliant products upon request. Contact customer service for details.