QF Hose Adapter 14ga

Nordfab manufactures ducting for use in dust, mist, and fume collection systems.

Nordfab QF® Hose Adapters provide connection from Quick-Fit^® (QF) ductwork to flex hose. Hose end is beaded to help retain hose with the hose clamp or bridge hose clamp.

14 gauge material construction adds extra durability.

For use with Nordfab flexible black rubber hose, clear rubber hose, or Static Dissipative Urethane Hose.

Available in galvanized steel and 304SS (as shown below) or optional 316SS or carbon steel
Available with flanged ends in diameters up to 72", and other various end types
Optional gauges standard 22 and 20, 18, 16, and 12

Contact Nordfab or your local Nordfab dealer for assistance with custom end types, larger sizes and material / gauge options.

Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Cпецификация

A. General Fabrication Requirements: Comply with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Ch. 3, "Round, Oval, and Flexible Duct," based on indicated static-pressure class unless otherwise indicated.
1. Construct ducts of galvanized sheet steel unless otherwise indicated.
2. Basis-of-Design Product: Subject to compliance with requirements, provide Nordfab Ducting, LLC; Quick Fit (QF) Duct.
B. Connection Joints: Joint types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Quick Fit Joints in Ducts 3 to 24 inches (76 to 510 mm) in diameter. Flange: Optional.
2. Flanged Joints in All Ducts Greater than 24 inches (610 mm) in diameter.
C. Longitudinal Seams: Seam types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Figure 3-2, "Round Duct Longitudinal Seams," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Fabricated round ducts 3 to 24 inches (76 to 510 mm) in diameter to have laser-welded or plasma-welded longitudinal seams.
2. Fabricated round ducts above 24 inches (610 mm) in diameter to have plasma-welded longitudinal seams.

Техническая спецификация

Уникальная ссылкаus-qf-hose-adapter-14ga
Тип продукцииQuick-Fit Clamp Together Ducting
Группа продукцииAdapters
ТипОбъект (один объект)
Дата публикации2024-05-08
Номер версии1

Ссылки

Ссылка на продукциюhttps://www.nordfab.com/en-us/products/qf-ducting/adapters/us-qf-hose-adapter-14ga
Техническое описаниеhttps://www.nordfab.com/-/media/files/nordfab/americas/americas-product-data-sheets/nordfab_hose_adapter.pdf

Связанные

Основной материалОцинкованная сталь
Разработано вСоединенные Штаты Америки
Страна-производительСоединенные Штаты Америки

Классификация

Категория BIMobjectВентиляция и кондиционирование воздуха - Dust Collection
Классификация IFCСоединение воздуховода
Код ETIMEG015540
Название ETIMFittings, flanges and connectors
Код Uniclass 2015Pr_65_65_25
Описание Uniclass 2015Ductwork and fittings
Код CSI MasterFormat 201423 31 13.19
Заголовок CSI MasterFormat 2014Metal Duct Fittings
Номер OmniClass23-33 49 00
Наименование OmniClassHVAC Ductwork

Доступно в регионах:

Северная Америка
Белиз
Бермуды
Британские Виргинские острова
Канада
Коста-Рика
Мексика
Панама
Пуэрто-Рико
Сен-Мартен
Соединенные Штаты Америки

QF Hose Adapter 14ga

Похожие продукты

Для производителей

О компании

Юридические вопросы