Bock ElectriTHERM Swing Tank Plus Water Heater

Swing Tank Plus

• Designed for use in Commercial Heat Pump Water Heating Systems as a Swing Tank for Single-Pass or Multi-Pass Heat Pump Systems
• PLUS - a means to augment energy input for multi-pass heat pumps when ambient temperature < 40°F or as an emergency backup unit.
• Step modulation between three inputs – Min, Mid, or Max
  • At call-for-heat, the initial input is based on (supplied)outdoor temperature sensor reading(≥40°F = Min; <40°Fand ≥24°F = Mid; <24°F = Max)
  • Attempts to recover tank temperature at lowest electric resistance input
  • Additional input added if sensor continues to drop from setpoint
• Two configurations available
  • 12.1/24/36kW
  • 18/36/49.5kW
• 208, 240, or 480 VAC
• 50 and 119 gallon models
• ASME Section IV HLW - available on 119 gallon model
• Versatile Piping Options
  • (5) 2" NPT connections (50 gal)
  • (5) 2.5" NPT connections (119 gal)
  • Optional upper side connections (extra pipe nipples supplied)
• Three thermowells for temperature monitoring (up to ø0.38" sensor)
• Two Operating Modes – Swing Tank Plus Mode or Standard Electric Water Heater Mode (for emergency backup only)
• BACnet MSTP standard
• Alarm Out (normally open, volt-free dry contact)
• Enable/Disable (with factory jumper)
• Dip switches to limit maximum input
• 182°F maximum setpoint
• AHRI Certified
• UL listed
  • UL 1453 – Electric Booster and Commercial Storage Tank Water Heaters
  • NSF 372 and NSF 5
• 5-year limited tank warranty

Made in the USA