PREPRUFE® Plus / BITUTHENE® 8000-8000S Waterproofing System

PREPRUFE® Plus / BITUTHENE® 8000-8000S Waterproofing System

Traduzido por Google,

PREPRUFE® Plus

As membranas impermeáveis PREPRUFE® Plus são folhas compostas compostas por um robusto suporte virgem de HDPE, um adesivo sensível à pressão e um revestimento trafegável resistente às intempéries com adesivo duplo PREPRUFE® ZipLap™ para maior segurança e praticidade na sobreposição. Com sua Advanced Bond Technology™, as membranas desenvolvem uma ligação adesiva contínua ao concreto derramado sobre ou contra ele, evitando a migração de água entre a estrutura e a membrana, melhorando significativamente a proteção contra vazamentos.

BITUTHENE® 8000/8000S

O BITUTHENE® 8000/8000S combina a comprovada tecnologia adesiva BITUTHENE® com um exclusivo filme de suporte de cor cinza para fornecer desempenho superior e instalação mais fácil.

Especificação

PREPRUFE® Plus
Integrally bonded HDPE sheet waterproofing with dual adhesive laps for pre-applied waterproofing applications for installation below slab. Basis of design is PREPRUFE® 300R Plus by GCP Applied Technologies.
Membrane shall be 1.2mm thick, uniform, flexible sheets consisting of 0.8mm thick, HDPE sheet coated with a pressure-sensitive adhesive, a trafficable weather resistant coating.
The membrane shall have a kick-out roll function to facilitate ease of application and shall have no release liner to reduce the environmental impact. Continuity between adjacent sheets shall be assured with dual adhesive laps. The membrane shall form an integral and permanent bond to placed concrete to prevent water migration at the interface of the membrane and structural concrete.
The membrane shall be chemically resistant and protect the structure from salt and sulphate attack. It shall have been proven to be tested to a resist a minimum lateral water migration of 70m head of water (686kpa), at the membrane concrete interface and have a zero permeance to moisture, it will not activate prematurely due to wet conditions and is unaffected by ground settlement beneath slabs.
BITUTHENE® 8000/8000S
Integrally bonded Bituminous/ HDPE sheet waterproofing with self adhesive laps for post applied waterproofing applications. Basis of design is GCP BITUTHENE® 8000 by GCP Applied Technologies.
The membrane shall be formed of a, flexible, multi-layered composite sheet membrane comprising a thick grey HDPE film with an highly aggressive bituminous adhesive. The membrane is specially formulated to allow application to “green concrete” and able to be applied in damp or marginal weather conditions with the use of a moisture tolerant primer system. Typically employed vertically, for below slab or with soil retention systems refer to either PREPRUFE® 160R / PREPRUFE® 300R (J40/297) or consult GCP Applied Technologies for further guidance.
The membrane shall be chemically resistant It shall have been proven to be tested to a resist a minimum lateral water migration of 70m head of water (686kpa), at the membrane concrete interface and have a zero permeance to moisture, it will not activate prematurely due to wet conditions

Especificações técnicas

Ref.ª únicaPreprufe-Plus_Bituthene-8000-8000S_Waterproofing_System
Familia de productoWaterproofing
Grupo de produtosBelow Ground Applications
TipoMaterial de construção
Data de publicação2019-03-28
Número de edição1

Ligações

URL do produtohttps://gcpat.uk/en-gb/solutions/products/preprufe-pre-applied-waterproofing-solutions/preprufe-plus-membranes
Instruções de instalaçãohttps://gcpat.uk/en-gb/solutions/products/bituthene-post-applied-waterproofing/bituthene-8000-8000s-membranes
Vídeo de instruçõeshttps://www.youtube.com/channel/UCx7bYW1KV80z3XLfzSYcsGA
Descrição técnicahttps://gcpat.uk/en-gb/solutions/products/bituthene-post-applied-waterproofing/bituthene-8000-8000s-membranes

Relacionado

Material principalPolietileno
Material secundárioBitumen
Concebido emUnited States

Classificação

Categoria BIMobjectMateriais de construção - Impermeabilização & Membranas
Uniclass 2015 CódigoPr_25_57_65_60
Uniclass 2015 DescriçãoPlastics sheets

Disponibilidade da região

Europa
Albania
Andorra
Austria
Belarus
Belgium
Bosnia and Herzegovina
Bulgaria
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Greece
Hungary
Iceland
Ireland
Italy
Latvia
Liechtenstein
Lithuania
Luxembourg
Macedônia do Norte
Malta
Moldova
Monaco
Montenegro
Netherlands
Norway
Poland
Portugal
Romania
Russia
San Marino
Serbia
Slovakia
Slovenia
Spain
Sweden
Switzerland
Ukraine
United Kingdom
Vatican City