i250 Commercial Tankless System - Wall Hung

i250 Commercial Tankless System - Wall Hung

Commercial Tankless on-demand water heater

KEY FEATURES

• Stainless (316L) Heat Exchanger
• Flexible-Floating Design, stress-relieving and thermal shock resistant
• Multi-Unit - Masterless cascading with common venting
• Gas Pressures - Operates on gas pressure range of 2.5"- 14" w.c.
• Designed and Built in the U.S.
• 3.5" Color Touch Screen - access to usage data, troubleshooting, and parts wear

PERFORMANCE

• Turndown Ratio of 7:1 (i200) & 8.3:1 (i250) per unit.
• Cascade up to 10 units with common venting for a total of
over 2500MBH and a 83:1 total turndown ratio

Especificação

Type Indoor/Outdoor, Wall-Hung, Fully Condensing, Commercial, Tankless, Direct Ignition
Fuel Preset for NG / LP Convertible
Minimum / Maximum Input (BTU/hr) 30,000 / 250,000
Thermal Efficiency 92%
Energy Factor N/A
Dimensions H X W X D (Inches) 26.2 X 17.7 X 15 (3.9 CU. FT)
Weight (LBS) 93 LBS
Water and Gas Connections 3/4" NPT
Minimum Flow Rate 0.6 GPM
Max 3” Vent Length - Single Pipe / Power Vent 130 ft, deduct 5 ft per 90° elbow
Max 3” Vent Length - Two Pipe / Direct Vent 65 ft, deduct 5 ft per 90° elbow
Max 2” Vent Length - Single Pipe / Power Vent (2” not allowed at elevations above 4,000 ft) N/A
Max 2” Vent Length - Two Pipe / Direct Vent (2” not allowed at elevations above 4,000 ft) N/A
Installation Location Ambient Temperature 40°F – 130°F
Safety Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue
Temperature Monitor, Blocked Vent Detector, Water Shut-Off Valve, 2X10A Fuse, Dual
Flame Sensing
Water Pressure Min / Max (PSI) 30 / 150
NG/LP - Minimum Static Gas Pressure 1/2” Black Iron (non-corrugated) 5”
NG/LP - Minimum Static Gas Pressure 3/4” Black Iron (non-corrugated) 2.5”
NG/LP - Minimum Dynamic Pressure at Full Firing Rate 0.5”
NG/LP - Maximum Static Gas Pressure 14”
Gas Pressure for Adjustments 8” for NG, 11” for LP
Electrical 120V AC, 60 Hz
Power Consumption 500W (Max 4.2 Amps), 8W (Standby)

Especificação técnica

Ref. únicai250
Família de produtoi Series
Grupo de produtosCommercial Tankless System - Wall Hung
TipoObject (single object)
Data de publicação2020-05-11
Número da edição1

Links

Url do produtohttps://intellihot.com/products-commercial-tankless-hot-water-heater-type-gas/i-series/i250-i-series/
Instruções de instalaçãohttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii
Certificação do produtohttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii
Descrição técnicahttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii

Afins

Material principalSteel
Desenhado emUnited States
Fabricado emUnited States

Classificação

Categoria BIMobjectHVAC - Water Heaters
Classificação IFCHeat Exchanger
Código ETIMEC000392
Nome ETIMInstantaneous water heater
Nome UNSPSCCommercial water heaters
Código UNSPSC40101826
Código Uniclass 2015Pr_60_60_96
Descrição Uniclass 2015Water heaters
CSI MasterFormat 2014 Code23 00 00
Título CSI MasterFormat 2014Heating, Ventilating, and Air Conditioning (HVAC)
Número OmniClass23-31 29 11
Título OmniClassInstantaneous Hot Water Heaters
CSI UniFormat II CodeD3090
Título UniFormat II da CSIOther HVAC Systems & Equipment

Disponibilidade regional

North America	South America
Anguilla	Guyana
Antigua and Barbuda	Suriname
Aruba
Barbados
Belize
British Virgin Islands
Canada
Caribbean Netherlands
Cayman Islands
Collectivity of Saint Martin
Cuba
Curaçao
Dominica
Dominican Republic
Grenada
Guadeloupe
Haiti
Jamaica
Martinique
Montserrat
Puerto Rico
Saint Kitts and Nevis
Saint Lucia
Saint Vincent and the Grenadines
Saint-Barthélemy
Sint Maarten
The Bahamas
Trinidad and Tobago
Turks and Caicos Islands
U.S. Virgin Islands
United States