Meyer Sound

Ashby Ceiling Loudspeakers

The Ashby’s dual-driver concentric configuration offers accuracy and fidelity over a full range: Experience it all, from crystal-clear speech to music’s sparkling highs and rich bass.

Features & Benefits

Self-powered
Easy to install
Extremely wide and consistent coverage
Ultra low distortion
Exceptional SPL-to-size ratio
Beautiful low frequency response and reproduction of speech and music
Supports long cable runs with light-gauge cablesOne MPS-488HP can power up to 16 Ashby-8Cs

Applications

Distributed systems for music and paging that demand high-quality audio and vocal intelligibility
Constellation acoustic systems

Opis

Ceiling Loudspeaker: Ashby 5C
The loudspeaker shall be self-powered and include one 5-in (127 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 5-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 100 Hz - 18 kHz; phase response, 290 Hz – 16 kHz ±45° and a conical coverage of 110 degrees. The loudspeaker shall be capable of maximum linear peak SPL of 112 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The loudspeaker shall have looping capabilities, and when connected to one channel of the required power supply up to three units can be powered. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.32 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 450 ft with 18 AWG (135 m with 1.0 mm) and the maximum cable run for three looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 7.17 in (182 mm). Grille shall be made of perforated steel and its diameter shall be 9.34 in (237.3 mm).
Dimensions shall be 8.92 in (226.5 mm) in diameter and 7.17 in (182 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 7.60 - 7.875 in (193 - 200 mm). Weight shall be 7.8 lb (3.53 kg).
The loudspeaker shall be the Meyer Sound Ashby-5C
Ceiling Loudspeaker: Ashby 8C
The loudspeaker shall be self-powered and include one 8-in (203.2 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 8-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 60 Hz - 18 kHz; phase response, 190 Hz – 16 kHz ±45° and a conical coverage of 100 degrees.
The loudspeaker shall be capable of maximum linear peak SPL of 114 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.78 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 300 ft with 18 AWG (90 m with 1.0 mm) and the maximum cable run for two looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate also 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 8.87 in (225.3 mm). Grille shall be made of perforated steel and its diameter shall be 12.97 in (329.3 mm).
Dimensions shall be 12.64 in (321 mm) in diameter and 8.87 in (225.3 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 11.32 - 11.75 in (287.6 - 298.4 mm). Weight shall be 13.8 lb (6.26 kg).
The loudspeaker shall be the Meyer Sound Ashby-8C.
Keyword: Loudspeaker, Loudspeakers, Ceiling Loudspeaker, Ceiling Loudspeakers

Specyfikacja techniczna

Nr referencyjnymeyersound-ashby
Rodzina produktuLoudspeakers
Grupa produktuULTRA
TypObiekt (jeden obiekt)
Data publikacji2020-03-12
Numer edycji2

Linki

Url produktuhttps://meyersound.com/product/ashby/
Instrukcja montażuhttps://meyersound.com/download/ashby-operating-instructions/?wpdmdl=10918&masterkey=59fbc40103189
Certyfikacja produktuhttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc
Opis technicznyhttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc

Dodatkowe informacje

Materiał głównyAluminium
Zaprojektowano wStany Zjednoczone
Wyprodukowano wStany Zjednoczone

Klasyfikacja

Kategoria BIMobjectElementy elektroniczne - Elektronika dźwięku
Klasyfikacja IFCObiekt
Uniclass 2015 CodePr_70_75_36_50
Uniclass 2015 DescriptionLoudspeakers
CSI MasterFormat 2014 Code27 24 23
CSI MasterFormat 2014 TitleAudio-Video Devices
OmniClass Number23-37 15 29 11 13
OmniClass TitleLoudspeakers

Dostępny w krajach:

Europa	Azja	Ameryka północna	Afryka	Ameryka Południowa	Oceania
Albania	Afganistan	Anguilla	Algieria	Argentyna	Australia
Andora	Arabia Saudyjska	Antigua i Barbuda	Angola	Boliwia	Dalekie Wyspy Mniejsze Stanów Zjednoczonych
Austria	Armenia	Aruba	Benin	Brazylia	Fidżi
Belgia	Azerbejdżan	Bahamy	Botswana	Chile	Guam
Białoruś	Bahrajn	Barbados	Burkina Faso	Ekwador	Kiribati
Bośnia i Hercegowina	Bangladesz	Belize	Burundi	Falklandy (Malwiny)	Mariany Północne
Bułgaria	Bhutan	Bermudy	Czad	Gujana	Mikronezja
Chorwacja	Brunei Darussalam	Brytyjskie Wyspy Dziewicze	Demokratyczna Republika Konga	Gujana Francuska	Nauru
Cypr	Brytyjskie Terytorium Oceanu Indyjskiego	Curaçao	Dżibuti	Kolumbia	Niue
Czarnogóra	Chiny	Dominika	Egipt	Paragwaj	Norfolk
Czechy	Filipiny	Dominikana	Erytrea	Peru	Nowa Kaledonia
Dania	Gruzja	Grenada	Etiopia	Surinam	Nowa Zelandia
Estonia	Hongkong	Grenlandia	Gabon	Urugwaj	Palau
Finlandia	Indie	Gwadelupa	Gambia	Wenezuela	Papua-Nowa Gwinea
Francja	Indonezja	Gwatemala	Ghana		Pitcairn
Gibraltar	Izrael	Haiti	Gwinea		Polinezja Francuska
Grecja	Japonia	Holandia Karaibska	Gwinea Bissau		Samoa
Guernsey	Jemen	Honduras	Gwinea Równikowa		Samoa Amerykańskie
Hiszpania	Jordania	Jamajka	Kamerun		Timor Wschodni
Holandia	Kambodża	Kajmany	Kenia		Tokelau
Irlandia	Katar	Kanada	Komory		Tonga
Islandia	Kazachstan	Kostaryka	Kongo		Tuvalu
Jersey	Kirgistan	Kuba	Lesotho		Vanuatu
Liechtenstein	Korea Północna	Martynika	Liberia		Wallis i Futuna
Litwa	Korea Południowa	Meksyk	Libia		Wyspy Cooka
Łotwa	Kuwejt	Montserrat	Madagaskar		Wyspy Marshalla
Luksemburg	Laos	Nikaragua	Majotta		Wyspy Salomona
Macedonia Pólnocna	Liban	Panama	Malawi
Malta	Makau	Portoryko	Mali
Man	Malediwy	Saint Kitts i Nevis	Maroko
Mołdawia	Malezja	Saint Lucia	Mauretania
Monako	Mongolia	Saint Martin	Mauritius
Niemcy	Myanmar (Birma)	Saint Vincent i Grenadyny	Mozambik
Norwegia	Nepal	Salwador	Namibia
Polska	Oman	Sint Maarten	Niger
Portugalia	Pakistan	Stany Zjednoczone	Nigeria
Rosja	Palestyna	Trynidad i Tobago	Republika Południowej Afryki
Rumunia	Singapur	Turks i Caicos	Republika Środkowoafrykańska
San Marino	Sri Lanka	Wspólnota Saint-Barthélemy	Reunion
Serbia	Syria	Wspólnota Terytorialna Saint Pierre i Miquelon	Rwanda
Słowacja	Tadżykistan	Wyspy Dziewicze	Sahara Zachodnia
Słowenia	Tajlandia		Senegal
Svalbard	Tajwan		Seszele
Szwajcaria	Turcja		Sierra Leone
Szwecja	Turkmenistan		Somalia
Ukraina	Uzbekistan		Suazi
Watykan	Wietnam		Sudan
Węgry	Wyspa Bożego Narodzenia		Sudan Południowy
Wielka Brytania	Wyspy Kokosowe		Święta Helena
Włochy	Zjednoczone Emiraty Arabskie		Tanzania
Wyspy Alandzkie			Togo
Wyspy Owcze			Tunezja
			Uganda
			Wybrzeże Kości Słoniowej
			Wyspy Świętego Tomasza i Książęca
			Wyspy Zielonego Przylądka
			Zambia
			Zimbabwe