Control 50S/T Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System

Surface-Mount Subwoofer for Subwoofer-Satellite
Loudspeaker System
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.

FEATURES

Full bandwidth 32 Hz – 20 kHz high fidelity sound
Selectable 70V/100V for distributed lines, or low impedance
Versatility for either two or four satellite speakers per system
Available in black or white

Keywords: Harman

Opis

SPECIFICATIONS
Frequency Range (-10 dB) 32 Hz – 200 Hz
Frequency Response (±3 dB) 50 Hz – 150 Hz
Power Capacity 300 Watts Continuous Program Power (2 hrs)
150 Watts Continuous Pink Noise (2 hrs)
200 Watts Continuous Program Power (100 hrs)
100 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity
(2.83V, 1m) 95 dB (near corner), 89 dB (center of wall)
Rated Maximum SPL (1m) 115 dB average, 121 dB peak (near corner)
109 dB average, 115 dB peak (center of wall)
Nominal Impedance 8 ohms (in bypass/thru mode)
Transformer Taps 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
Transducer Driver 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
Input Connectors Six removable locking 2-pin connectors with screw-down terminals.
Max wire 12 AWG (2.5 mm2)
Material Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
Dimensions (H x W x D) Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in)
Wall Bracket: 15 mm (0.6 in) deep
Wall Bracket 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
Net Weight 9.0 kg (20 lbs)
Shipping Weight 10.2 kg (23 lbs)
Included Accessories Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.

Specyfikacja techniczna

Nr referencyjnyControl-50S-T-Surface-Mount-Subwoofer-for-Satellite-Loudspeaker-System
Rodzina produktuInstalled Sound
Grupa produktuSurface Mount Speakers
TypObiekt (jeden obiekt)
Data publikacji2019-06-22
Numer edycji1

Linki

Url produktuhttp://www.jblpro.com/www/products/installed-sound/control-50-series/control-50s-t#.XC4hgVxKiUl
Instrukcja montażuhttp://www.jblpro.com/ProductAttachments/C50ST_Installation_Guide.pdf
Opis technicznyhttp://www.jblpro.com/ProductAttachments/Control50_SpecSheet.pdf

Dodatkowe informacje

Zaprojektowano wStany Zjednoczone
Wyprodukowano wStany Zjednoczone

Klasyfikacja

Kategoria BIMobjectElementy elektroniczne - Elektronika dźwięku
Klasyfikacja IFCObiekt
Kod ETIMEC000682
Nazwa ETIMLoudspeaker set
UNSPSC nameAudio and visual presentation and composing equipment
UNSPSC code4511
Uniclass 2015 CodePr_70_75_36_50
Uniclass 2015 DescriptionLoudspeakers
CSI MasterFormat 2014 Code11 52 00
CSI MasterFormat 2014 TitleAudio-Visual Equipment
OmniClass Number23-37 15 29 11 13
OmniClass TitleLoudspeakers

Dostępny w krajach:

Ameryka północna
Anguilla
Antigua i Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudy
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Grenlandia
Gwadelupa
Gwatemala
Haiti
Holandia Karaibska
Honduras
Jamajka
Kajmany
Kanada
Kostaryka
Kuba
Martynika
Meksyk
Montserrat
Nikaragua
Panama
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Salwador
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wspólnota Terytorialna Saint Pierre i Miquelon
Wyspy Dziewicze