2AR 2″ ADJUSTABLE DOWNLIGHT – ROUND

FEATURES

2" aperture is unobtrusive in small scale spaces
Adjustable aim with 0° - 45° tilt and 360° rotation
Zero-flange trim options for modern ceiling
Etched degree markers and directional indicator make it simple to fine-tune the illumination angle
Beam angles ranging from 15º narrow to 35º wide for tailored performance
New construction mounting pan, IC-rated, or pan-less remodel kit available
Contemporary design provides glare-free illumination for a soft ceiling appearance
Choice of open reflector or die-cast flush, regressed or angled lensed trims to complement interior styles
Low UGR meets LEED and WELL requirements
Deliver scalable, data-driven smart buildings with PoE-enabled fixtures and controls
Support human-centric design with adaptive, individualized lighting using tunable white light
Mimic the comfortable, welcoming glow of incandescent with warm-dimming technology
Buy American Act compliant
Wireless in-fixture control solutions available
Made Right Here^® in the USA

Opis

Housing	Die-cast aluminum spun and stamped articulating mechanism with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Mounting clips allow for ceiling thickness from 1/2″ – 13/16″.
Open Reflector	Low-iridescent anodized aluminum. Clear semi-specular finish standard.
Lensed Trim	Die-cast aluminum frame with micro-prismatic, acrylic lens. Diffuse acrylic lens standard with A Trim Type.
Electrical	High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70 > 44,000 hours. Reported L90 = 28,000 hours. Estimated L70 = 117,000 hours.
Mounting	Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. N and R mounting types for use in non-fire rated installations only. Minimum 17″ O.C. marked spacing required for L12 and L15 lumen packages when specified with R Mounting Type.
Listings	• cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for dry and damp locations. LED light assembly conforms to UL 2108 for remote installation. • Suitable for wet location under covered ceiling when specified with WET/CC option. • IC-rated for direct contact with insulation when specified with I Mounting Type. • City of Chicago Environmental Air approved when specified with CP option. • Complies with ASTM-E283 when specified with ATH option. • RoHS compliant. • Complies with the Buy American Act and other federal regulations. Request certification at hew.com/baa.
Warranty	5-year limited warranty, see details

Specyfikacja techniczna

Nr referencyjny2ar-adjustabledownlight-round
Rodzina produktuIndoor Luminaires
Grupa produktuDownlights
TypObiekt (jeden obiekt)
Data publikacji2025-01-03
Numer edycji1

Linki

Url produktuhttps://hew.com/products/2ar
Instrukcja montażuhttps://hew.com/instruction/2-inch-downlight_instructions.pdf
Certyfikacja produktuhttps://hew.com/specifications/2AR_led.pdf

Dodatkowe informacje

Materiał głównyMetal
Materiał dodatkowySzkło
Zaprojektowano wStany Zjednoczone
Wyprodukowano wStany Zjednoczone

Klasyfikacja

Kategoria BIMobjectOświetlenie - Oświetlenie sufitowe
Klasyfikacja IFCUmocowanie światła
Uniclass 2015 CodeEF_70_80
Uniclass 2015 DescriptionLighting
CSI MasterFormat 2014 Code26 51 13
CSI MasterFormat 2014 TitleInterior Lighting Fixtures, Lamps, And Ballasts
OmniClass Number23-35 47 11
OmniClass TitleLighting Fixtures

Dostępny w krajach:

Ameryka północna
Anguilla
Antigua i Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudy
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Grenlandia
Gwadelupa
Gwatemala
Haiti
Holandia Karaibska
Honduras
Jamajka
Kajmany
Kanada
Kostaryka
Kuba
Martynika
Meksyk
Montserrat
Nikaragua
Panama
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Salwador
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wspólnota Terytorialna Saint Pierre i Miquelon
Wyspy Dziewicze