Opublikuj swoje produkty
Geofor - Overlapping prefabricated bed joint reinforcement
Geofor - Overlapping prefabricated bed joint reinforcement
Geofor - Overlapping prefabricated bed joint reinforcement
Geofor - Overlapping prefabricated bed joint reinforcement
    Geohidrol

    Geofor - Overlapping prefabricated bed joint reinforcement

    Overlapping prefabricated bed joint reinforcement consisting of two parallel longitudinal wires (that are) joined by a central wire. The central wire forms a truss structure and is welded (soldered) on (in) the same plane along the inner side of the longitudinal wires. It has an innovative design that enables the (performing of the) overlap between reinforcements without the need for any further manipulation, keeping the same nominal width of the reinforcement in the overlap area. The ends of the pieces have a specific geometric plug-shaped configuration which enables the 250mm overlap to be performed without the need to cut the wires. Also, the transverse wire is crushed in said area so that minimum mortar beds can be ensured. It also has spacers on the transverse wires which permit the control of the bed joint thickness. It also includes some devices, called SAO, placed at both ends of the pieces which permit visual verification, after the execution phase, that the amounts of wall reinforcement correspond to those of the design and that the overlap length complies with the regulations.
    Opis
    • Bed joint reinforcement valid for cracking control in masonry walls (made) of coated bricks, facebricks, lighweight clay blocks, hollow concrete blocks and concrete bricks. This reinforcement also permits structural use to execute cavity wall façades, self-supporting façades and ventilated façades. It is essential for the execution of any masonry wall made with GHAS SYSTEM. This system permits continuous thermal insulation and is suitable for “passive hause”.
    Specyfikacja techniczna
    • Nr referencyjnygeofor
    • Rodzina produktuBed Joint Reinforcement
    • Grupa produktuGeofor
    • TypObiekt (jeden obiekt)
    • Data publikacji2017-05-08
    • Numer edycji1
    Dodatkowe informacje
    • Materiał głównyStal
    • Zaprojektowano wHiszpania
    • Wyprodukowano wHiszpania
    Klasyfikacja
    • Kategoria BIMobjectMateriały budowlane - Wzmocnienie
    • Klasyfikacja IFCSiatka zbrojeniowa
    • UNSPSC nameBricks
    • UNSPSC code301316
    • Uniclass 2015 CodeSs_25_13_50
    • Uniclass 2015 DescriptionMasonry wall systems
    • CSI MasterFormat 2014 Code04 05 19.26
    • CSI MasterFormat 2014 TitleMasonry Reinforcing Bars
    • OmniClass Number23-13 21 21 11
    • OmniClass TitleMasonry Reinforcing
    • CSI UniFormat II CodeB2010
    • CSI UniFormat II TitleExterior Walls

    Dostępny w krajach:

    Europa
    Albania
    Andora
    Austria
    Belgia
    Białoruś
    Bośnia i Hercegowina
    Bułgaria
    Chorwacja
    Cypr
    Czarnogóra
    Czechy
    Dania
    Estonia
    Finlandia
    Francja
    Gibraltar
    Grecja
    Guernsey
    Hiszpania
    Holandia
    Irlandia
    Islandia
    Jersey
    Liechtenstein
    Litwa
    Łotwa
    Luksemburg
    Macedonia Pólnocna
    Malta
    Man
    Mołdawia
    Monako
    Niemcy
    Norwegia
    Polska
    Portugalia
    Rosja
    Rumunia
    San Marino
    Serbia
    Słowacja
    Słowenia
    Svalbard
    Szwajcaria
    Szwecja
    Ukraina
    Watykan
    Węgry
    Wielka Brytania
    Włochy
    Wyspy Alandzkie
    Wyspy Owcze