Opublikuj swoje produkty
OPERA 160
Ferroli

OPERA 160

High power condensing thermal module with large water content, designed for single or bank installations, in combination with a complete range of hydro, gas and flue gas accessories, up to 960 kW

Hydraulic, gas and flue gas accessories for bank installation, INAIL certificate, with 2 and 3 modules

Flue gas tube heat exchanger, made with AISI 316 Ti stainless steel, with vertical configuration, helical cross-section, set up perpendicularly to the flue gas chamber

Full pre-mixing combustion unit with metal fibre front combustion burner with very low emissions (CLASS 6 according to EN 15502-1). The modules can run on Methane and LPG 

The combustion chamber has an extremely contained overall vertical dimension so that the exchange of water/flue gases can take place over the entire extension of the exchanger

Generator protection systems: Double sensor (delivery and return) system for operation at ∆T constant (adjustable up to 60°C) / Flue gas safety sensor / Water pressure switch with minimum threshold at 0.8 bar

Air / Flue gas circuit with intake in the installation site and check valve integrated on the intake unit to size the pressurised flue gas manifold

Control panel protected by a door built into the outer casing with key lock

Four heavy-duty floating wheels fitted per standard to facilitate unloading and mobility inside the thermal power plant. Adjustable feet for positioning

Opis
  • It reaches one of the highest seasonal space heating efficiencies in its category: ηs 94%

    A+ SYSTEM: combined with the modulating remote control and the external probe (optional) it reaches the top efficiency class A+ (scale from G to A+++)

    The large volume of water of the generator allows the boiler to be connected to the system without the need for separating devices and allows for a very high design ∆t

    Management of the modules in bank set-up with self-configuring MASTER / SLAVE system

    Setting of switching on and off of generators (which can be switched on and off in sequence or work simultaneously in  parallel) through the control panel of the MASTER generator

    Electronics on board the machine to manage a system with two direct zones and one DHW storage or systems with differentiated temperatures (direct and mixed) in combination with the FZ4 B temperature control unit

    RANGE RATED certified generator to adjust the generated power to the system’s needs by increasing the efficiency of the system and preserving the mechanics of the machine

    The modules can be controlled and conducted remotely: Regulation of power or temperature with 0 - 10V signal / Signalling of block alarm for safety and restoration of operation / OPENTHERM (OT) and MODBUS parameterisable communication protocols 

Specyfikacja techniczna
  • Nr referencyjnyOPERA-160
  • Rodzina produktuHVAC - Boilers
  • Grupa produktuBoilers
  • TypObiekt (jeden obiekt)
  • Data publikacji2020-05-29
  • Numer edycji1
Dodatkowe informacje
  • Materiał głównyMetal
  • Materiał dodatkowyPlastikowy
  • Zaprojektowano wWłochy
  • Wyprodukowano wWłochy
Klasyfikacja
  • Kategoria BIMobjectHVAC - Kotły
  • Klasyfikacja IFCKocioł
  • UNSPSC nameBoilers
  • UNSPSC code401020
  • Uniclass 2015 CodePr_60_60_08
  • Uniclass 2015 DescriptionBoilers
  • CSI MasterFormat 2014 Code23 52 00
  • CSI MasterFormat 2014 TitleHeating Boilers
  • OmniClass Number23-33 11 13
  • OmniClass TitleCondensing Boilers
  • CSI UniFormat II CodeD3020
  • CSI UniFormat II TitleHeat Generating Systems

Dostępny w krajach:

Europa
Albania
Andora
Austria
Belgia
Białoruś
Bośnia i Hercegowina
Bułgaria
Chorwacja
Cypr
Czarnogóra
Czechy
Dania
Estonia
Finlandia
Francja
Gibraltar
Grecja
Guernsey
Hiszpania
Holandia
Irlandia
Islandia
Jersey
Liechtenstein
Litwa
Łotwa
Luksemburg
Macedonia Pólnocna
Malta
Man
Mołdawia
Monako
Niemcy
Norwegia
Polska
Portugalia
Rosja
Rumunia
San Marino
Serbia
Słowacja
Słowenia
Svalbard
Szwajcaria
Szwecja
Ukraina
Watykan
Węgry
Wielka Brytania
Włochy
Wyspy Alandzkie
Wyspy Owcze