The Problem
Installing a rainscreen and lath separately requires additional fasteners and increases labor costs. Metal mesh poses a safety hazard to the workers during installation due to sharp metal. Installing absorptive cladding over wood-based sheathing can lead to moisture damage to the wall assembly.
The Solution
The DELTA®-DRY & LATH is a 2-in-1 product that combines the proven technology of the DELTA®-DRY rainscreen with an innovative fiberglass lath for a complete, one-step moisture control and lath system in one. By combining these two critical components in one, an entire step is eliminated from the construction process. DELTA®-DRY & LATH eliminates the need for a metal lath, providing easier and safer handling for the installer. The alkali-resistant glass is not affected by chemicals and will not corrode.
Solar-driven moisture is stopped before it can do any damage. At the same time, DELTA®-DRY & LATH also allows any incidental moisture from within the wall to dry to the outside.
DELTA®-DRY & LATH is extremely durable and will protect the building from moisture damage well into the future.
Product Details
Ventilated rainscreen with pre-installed glass lath for manufactured stone and conventional stucco claddings.
Rainscreen membrane with Air-gap Technology made of a special High-Density Polyethylene (HDPE)
Alkali-resistant glass lath that replaces wire lath for application of scratch coat
Two-sided drainage and ventilation through a unique dimple and groove design
Product Benefits
DELTA®-DRY & LATH is easy, safe, and quick to install
The 2-in-1 solution reduces labor costs when used with claddings requiring scratch coat
DELTA®-DRY & LATH has a pre-installed glass lath, which makes it ideal for installing absorptive claddings
Drainage and ventilation through the air gap on the interior and exterior side of the membrane
Long-term structural integrity due to a reduced potential for water
The pre-installed, alkali-resistant glass lath is in compliance with ICC-ES AC 275 (MVMA requirements) Meets ASTM E2925-17 (Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function)
IAPMO Evaluation Number 323
Dostępny w krajach:
Europa | Ameryka północna |
---|---|
Albania | Anguilla |
Andora | Antigua i Barbuda |
Austria | Aruba |
Belgia | Bahamy |
Białoruś | Barbados |
Bośnia i Hercegowina | Belize |
Bułgaria | Bermudy |
Chorwacja | Brytyjskie Wyspy Dziewicze |
Cypr | Curaçao |
Czarnogóra | Dominika |
Czechy | Dominikana |
Dania | Grenada |
Estonia | Grenlandia |
Finlandia | Gwadelupa |
Francja | Gwatemala |
Gibraltar | Haiti |
Grecja | Holandia Karaibska |
Guernsey | Honduras |
Hiszpania | Jamajka |
Holandia | Kajmany |
Irlandia | Kanada |
Islandia | Kostaryka |
Jersey | Kuba |
Liechtenstein | Martynika |
Litwa | Meksyk |
Łotwa | Montserrat |
Luksemburg | Nikaragua |
Macedonia Pólnocna | Panama |
Malta | Portoryko |
Man | Saint Kitts i Nevis |
Mołdawia | Saint Lucia |
Monako | Saint Martin |
Niemcy | Saint Vincent i Grenadyny |
Norwegia | Salwador |
Polska | Sint Maarten |
Portugalia | Stany Zjednoczone |
Rosja | Trynidad i Tobago |
Rumunia | Turks i Caicos |
San Marino | Wspólnota Saint-Barthélemy |
Serbia | Wspólnota Terytorialna Saint Pierre i Miquelon |
Słowacja | Wyspy Dziewicze |
Słowenia | |
Svalbard | |
Szwajcaria | |
Szwecja | |
Ukraina | |
Watykan | |
Węgry | |
Wielka Brytania | |
Włochy | |
Wyspy Alandzkie | |
Wyspy Owcze |