Opublikuj swoje produkty
DBX1017FR Fire Rated Metal Dryer Vent Box

DBX1017FR Fire Rated Metal Dryer Vent Box

24 Gauge Powder Coated Metal Dryer Vent Box. The inexpensive DBX1017FR metal dryer vent box is powder coated white to match the washer box. The box is 10” WIDE BY 17″ TALL and designed to fit into a 2 x 6 framed wall or 2×4 framed wall. Designed and tested to meet 1 hour equal F&T fire rating requirement for through penetration fire rated system. * Please see installation instructions on how to meet 1 Hour requirement.

The DBX1017FR also has the Length identification label inside it to meet the 2015 IMC building code requirement. IMC 504.8.5.

Opis
  • Part numbers:

    DBX1017FR6 (For 2×6 framed walls)

    DBX1017FR4 (For 2×4 or 2×6 framed walls)

    Packaging:

    The DBX1017FR’s are packaged 10 per carton

    Dimensions:

    The DBX1017FR6 is 17’’ tall and 10’’ wide & 4 ¼ deep

    The DBX1017FR4 is 17’’ tall and 10’’ wide & 3 1/2 deep

    Benefits:

    The inexpensive DBX1017FR is powder coated white to match the washer box. Designed and tested to meet 1 hour equal F& T fire rating requirement for through penetration fire rated system. The required length identification label that is attached inside the DBX1017FR saves you money and time. We are the only company who includes it while other companies charge you a few dollars for it separately.

    Building Code:

    APPROVED FOR SINGLE AND MULTI-FAMILY CONSTRUCTION
    THE DBX1017FR MEETS THE REQUIREMENTS FOR A 1 HOUR FIRESTOP SYSTEM FOR BOTH WOOD AND METAL FRAMED WALLS.
    ** see installation instructions

    INTERNATIONAL MECHANICAL CODE
    SECTION 504
    CLOTHES DRYER EXHUAST

    SECTION 504.2 EXHAUST PENETRATIONS
    Where a clothes dryer exhaust duct penetrates a wall or ceiling membrane, the annular space shall be sealed with noncombustible material, approved fire caulking or a noncombustible dryer exhaust duct wall receptacle.

    SECTION 1502.4.6
    “LENGTH IDENTIFICATION”
    This section requires the installer to provide a tag or label within 6′ of the dryer exhaust stating how many elbows and length of the dryer exhaust until it exits the residence.

    CONSTRUCTION SOLUTIONS PROVIDES THE LABEL INSIDE THE DRYER VENT BOX AT NO COST TO MEET THE BUILDING CODE REQUIREMENT.

Specyfikacja techniczna
  • Nr referencyjnydbx1017fr-metal-dryer-vent-box
  • Rodzina produktuDryer Vent Box
  • Grupa produktuFire Rated Metal
  • TypObiekt (jeden obiekt)
  • Data publikacji2023-06-28
  • Numer edycji1
Dodatkowe informacje
  • Materiał głównyStal
Klasyfikacja
  • Kategoria BIMobjectHVAC - Wentylacja mechaniczna

Dostępny w krajach:

Ameryka północna
Anguilla
Antigua i Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudy
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Grenlandia
Gwadelupa
Gwatemala
Haiti
Holandia Karaibska
Honduras
Jamajka
Kajmany
Kanada
Kostaryka
Kuba
Martynika
Meksyk
Montserrat
Nikaragua
Panama
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Salwador
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wspólnota Terytorialna Saint Pierre i Miquelon
Wyspy Dziewicze