Opublikuj swoje produkty
ARDEX ERM - Exterior Ramp Mortar
ARDEX ERM - Exterior Ramp Mortar
    ARDEX

    ARDEX ERM - Exterior Ramp Mortar

    ARDEX ERM™ Exterior Ramp Mortar is a trowel-grade, polymer-modified Portland cement-based, structural repair mortar for deteriorated exterior and interior concrete above, on or below grade. It has a corrosion inhibitor built-in to protect reinforcing steel. Key Features Integral corrosion inhibitor Easy to apply Mixes with water only Installs from 1/4” – 2” (6 mm – 5.1 cm) neat and up to 8” (20.3 cm) when extended with aggregate Freeze-thaw resistant Suitable for normal service commercial, institutional and multi-unit residential applications Use for exterior and interior concrete repair
    Opis
    • Installation
      Mixing Ratio: 6 1/2 pints (3.08 L) of water per 55 lb. (25 kg) bag
      Coverage: 0.46 cu. ft. per 55 lb. bag (0.01 m3 per 25 kg bag); 22 sq. ft. per 55 lb. bag at 1/4”; (2.04 m2 per 25 kg bag at 6 mm)

      Performance
      Compressive Strength (ASTM C109): 7 days 7000 psi; 490 kg/sq. cm; 28 days 8200 psi; 574.0 kg/sq. cm
      Flexural Strength (ASTM C293): 7 days 1200 psi; 84 kg/sq. cm; 28 days 1500 psi; 105 kg/sq. cm
      Modulus of Elasticity ASTM C469): 28 days 3.67 x 106 psi; 2.6 x 105 kg/sq. cm
      Length Change (ASTM C157): 7 days 0.06%; 28 days 0.08%
      Rapid Chloride Permeability (ASTM C1202, 28 days): 820 coulombs
      Pot Life / Working Time: 25 – 45 minutes
      Time to Traffic: Light foot 2 – 4 hours; Normal foot 3 days; Full, including rolling loads 5 – 7 days
      Coat or Seal (Minimum): 3 – 7 days
      Color: Gray
      Packaging: 55 lb. (25 kg) bag
      Storage: Store in a cool dry area. Do not leave bags exposed to direct sunlight. Keep from freezing.
      Shelf Life: 1 year, if unopened.
      Warranty: ARDEX L.P. Standard Limited Warranty applies.

    Specyfikacja techniczna
    • Nr referencyjnyARDEX-ERM
    • Rodzina produktuConcrete Repair
    • Grupa produktuExterior Ramp Mortar
    • TypObiekt (jeden obiekt)
    • Data publikacji2019-11-07
    • Numer edycji1
    Dodatkowe informacje
    • Zaprojektowano wStany Zjednoczone
    • Wyprodukowano wStany Zjednoczone
    Klasyfikacja
    • Kategoria BIMobjectMateriały budowlane - Beton
    • UNSPSC nameInterior finishing materials
    • UNSPSC code3016
    • CSI MasterFormat 2014 Code09 93 23.53
    • CSI MasterFormat 2014 TitleInterior Finishing
    • OmniClass Number23-15 00 00
    • OmniClass TitleInterior and Finish Products
    • CSI UniFormat II CodeC30
    • CSI UniFormat II TitleINTERIOR FINISHES

    Dostępny w krajach:

    Ameryka północna
    Anguilla
    Antigua i Barbuda
    Aruba
    Bahamy
    Barbados
    Belize
    Bermudy
    Brytyjskie Wyspy Dziewicze
    Curaçao
    Dominika
    Dominikana
    Grenada
    Grenlandia
    Gwadelupa
    Gwatemala
    Haiti
    Holandia Karaibska
    Honduras
    Jamajka
    Kajmany
    Kanada
    Kostaryka
    Kuba
    Martynika
    Meksyk
    Montserrat
    Nikaragua
    Panama
    Portoryko
    Saint Kitts i Nevis
    Saint Lucia
    Saint Martin
    Saint Vincent i Grenadyny
    Salwador
    Sint Maarten
    Stany Zjednoczone
    Trynidad i Tobago
    Turks i Caicos
    Wspólnota Saint-Barthélemy
    Wspólnota Terytorialna Saint Pierre i Miquelon
    Wyspy Dziewicze