i250 Commercial Tankless System - Wall Hung

i250 Commercial Tankless System - Wall Hung

Commercial Tankless on-demand water heater

KEY FEATURES

• Stainless (316L) Heat Exchanger
• Flexible-Floating Design, stress-relieving and thermal shock resistant
• Multi-Unit - Masterless cascading with common venting
• Gas Pressures - Operates on gas pressure range of 2.5"- 14" w.c.
• Designed and Built in the U.S.
• 3.5" Color Touch Screen - access to usage data, troubleshooting, and parts wear

PERFORMANCE

• Turndown Ratio of 7:1 (i200) & 8.3:1 (i250) per unit.
• Cascade up to 10 units with common venting for a total of
over 2500MBH and a 83:1 total turndown ratio

Spesifikasjon

Type Indoor/Outdoor, Wall-Hung, Fully Condensing, Commercial, Tankless, Direct Ignition
Fuel Preset for NG / LP Convertible
Minimum / Maximum Input (BTU/hr) 30,000 / 250,000
Thermal Efficiency 92%
Energy Factor N/A
Dimensions H X W X D (Inches) 26.2 X 17.7 X 15 (3.9 CU. FT)
Weight (LBS) 93 LBS
Water and Gas Connections 3/4" NPT
Minimum Flow Rate 0.6 GPM
Max 3” Vent Length - Single Pipe / Power Vent 130 ft, deduct 5 ft per 90° elbow
Max 3” Vent Length - Two Pipe / Direct Vent 65 ft, deduct 5 ft per 90° elbow
Max 2” Vent Length - Single Pipe / Power Vent (2” not allowed at elevations above 4,000 ft) N/A
Max 2” Vent Length - Two Pipe / Direct Vent (2” not allowed at elevations above 4,000 ft) N/A
Installation Location Ambient Temperature 40°F – 130°F
Safety Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue
Temperature Monitor, Blocked Vent Detector, Water Shut-Off Valve, 2X10A Fuse, Dual
Flame Sensing
Water Pressure Min / Max (PSI) 30 / 150
NG/LP - Minimum Static Gas Pressure 1/2” Black Iron (non-corrugated) 5”
NG/LP - Minimum Static Gas Pressure 3/4” Black Iron (non-corrugated) 2.5”
NG/LP - Minimum Dynamic Pressure at Full Firing Rate 0.5”
NG/LP - Maximum Static Gas Pressure 14”
Gas Pressure for Adjustments 8” for NG, 11” for LP
Electrical 120V AC, 60 Hz
Power Consumption 500W (Max 4.2 Amps), 8W (Standby)

Tekniske spesifikasjoner

Unik ref.i250
Produktfamiliei Series
ProduktgruppeCommercial Tankless System - Wall Hung
TypeObjekt (enkelt objekt)
Utgivelsesdato2020-05-11
Utgavenummer1

Lenker

Produktets nettadressehttps://intellihot.com/products-commercial-tankless-hot-water-heater-type-gas/i-series/i250-i-series/
Monteringsanvisninghttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii
Produktsertifiseringhttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii
Teknisk beskrivelsehttps://intellihot.com/resources/downloads/gen-ii/profile/i250-gen-ii

Relatert

HovedmaterialeStål
Designet iUSA
Produsert iUSA

Klassifisering

BIMobject kategoriVVS - Water heaters
IFC-klassifiseringVarmeveksler
ETIM-kodeEC000392
ETIM-navnInstantaneous water heater
UNSPSC-navnCommercial water heaters
UNSPSC-kode40101826
Uniclass 2015 kodePr_60_60_96
Uniclass 2015 beskrivelseWater heaters
CSI MasterFormat 2014 kode23 00 00
CSI MasterFormat 2014 tittelHeating, Ventilating, and Air Conditioning (HVAC)
OmniClass-nummer23-31 29 11
OmniClass-tittelInstantaneous Hot Water Heaters
CSI UniFormat II kodeD3090
CSI UniFormat II tittelOther HVAC Systems & Equipment

Tilgjengelighet etter region

Nord Amerika	Sør Amerika
Anguilla	Guyana
Antigua og Barbuda	Surinam
Aruba
Bahamas
Barbados
Belize
Canada
Cayman Islands
Cuba
Curaçao
Den dominikanske republikk
Dominica
Grenada
Guadeloupe
Haiti
Jamaica
Jomfruøyene
Jomfruøyene
Karibisk Nederland
Martinique
Montserrat
Puerto Rico
Saint Kitts og Nevis
Saint Lucia
Saint Vincent og Grenadinene
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad og Tobago
Turks- og Caicosøyene
USA