Geofor - Overlapping prefabricated bed joint reinforcement

Geofor - Overlapping prefabricated bed joint reinforcement

Overlapping prefabricated bed joint reinforcement consisting of two parallel longitudinal wires (that are) joined by a central wire. The central wire forms a truss structure and is welded (soldered) on (in) the same plane along the inner side of the longitudinal wires. It has an innovative design that enables the (performing of the) overlap between reinforcements without the need for any further manipulation, keeping the same nominal width of the reinforcement in the overlap area. The ends of the pieces have a specific geometric plug-shaped configuration which enables the 250mm overlap to be performed without the need to cut the wires. Also, the transverse wire is crushed in said area so that minimum mortar beds can be ensured. It also has spacers on the transverse wires which permit the control of the bed joint thickness. It also includes some devices, called SAO, placed at both ends of the pieces which permit visual verification, after the execution phase, that the amounts of wall reinforcement correspond to those of the design and that the overlap length complies with the regulations.

Spesifikasjon

Bed joint reinforcement valid for cracking control in masonry walls (made) of coated bricks, facebricks, lighweight clay blocks, hollow concrete blocks and concrete bricks. This reinforcement also permits structural use to execute cavity wall façades, self-supporting façades and ventilated façades. It is essential for the execution of any masonry wall made with GHAS SYSTEM. This system permits continuous thermal insulation and is suitable for “passive hause”.

Tekniske spesifikasjoner

Unik ref.geofor
ProduktfamilieBed Joint Reinforcement
ProduktgruppeGeofor
TypeObjekt (enkelt objekt)
Utgivelsesdato2017-05-08
Utgavenummer1

Lenker

Produktets nettadressehttp://www.geohidrol.com/?products=geofor%C2%AE

Relatert

HovedmaterialeStål
Designet iSpania
Produsert iSpania

Klassifisering

BIMobject kategoriByggematerialer - Forsterkning
IFC-klassifiseringarmeringsnett
UNSPSC-navnBricks
UNSPSC-kode301316
Uniclass 2015 kodeSs_25_13_50
Uniclass 2015 beskrivelseMasonry wall systems
CSI MasterFormat 2014 kode04 05 19.26
CSI MasterFormat 2014 tittelMasonry Reinforcing Bars
OmniClass-nummer23-13 21 21 11
OmniClass-tittelMasonry Reinforcing
CSI UniFormat II kodeB2010
CSI UniFormat II tittelExterior Walls

Tilgjengelighet etter region

Europa
Åland
Albania
Andorra
Belgia
Bosnia-Hercegovina
Bulgaria
Danmark
Estland
Færøyene
Finland
Frankrike
Gibraltar
Guernsey
Hellas
Hviterussland
Irland
Island
Isle of Man
Italia
Jersey
Kroatia
Kypros
Latvia
Liechtenstein
Litauen
Luxemburg
Malta
Moldova
Monaco
Montenegro
Nederland
Nord-Makedonia
Norge
Østerrike
Polen
Portugal
Romania
Russland
San Marino
Serbia
Slovakia
Slovenia
Spania
Storbritannia
Svalbard og Jan Mayen
Sveits
Sverige
Tsjekkia
Tyskland
Ukraina
Ungarn
Vatikanstaten