BIM-objecten – gratis downloaden! Ravatherm XPS DRAIN 300 Insulation panel

Ravatherm XPS DRAIN 300 Insulation panel

RAVATHERM XPS DRAIN 300 is an extruded polystyrene foam thermal insulation with very high thermal performance, grooved/ribbed edges, covered with an 8 mm HDPE drainage sheet and a non-woven geotextile. The extrusion process gives it a homogeneous closed-cell structure and a smooth extrusion skin that provides high thermal and mechanical performance.

Applications

buried and foundation from the outside according to professional recommendations of the CSFE

Product advantages

Compatible IGH and ERP

Ideal for new buildings and renovation

Solution economical 3 in 1:

insulation, drainage and protection and waterproofing

Thermal bridges reduction

easiness of implementation by interlocking

Haute compressive strength

Insensible to water

aggregated with the polyurethane foam glue polyurethane adhesive RAVATHERM FIX and the SPRAY GUN.

Specificatie

Products designated under the trade references
RAVATHERM™ XPS DRAIN 300 T P
RAVATHERM™ XPS DRAIN 300 L P
and manufactured by the factories of :
Artix - France (64)
CERTIFIED THERMAL CONDUCTIVITY :
λD = 0.033 W/(m.K) (from 30 to 80 mm)
λD = 0.034 W/(m.K) (from 85 to 120 mm)
λD = 0.035 W/(m.K) (from 125 to 240 mm)
Thermal resistance
Thickness (mm) 30 35 40 45 50 55 60 65 70 75
R (m2.K/W) 0.90 1.05 1.20 1.35 1.50 1.65 1.80 1.95 2.10 2.25
Thickness (mm) 80 85 90 95 100 105 110 115 120 125 130
R (m2.K/W) 2,40 2,50 2,65 2,80 2,95 3,10 3,25 3,40 3,55 3,55 3,70
Thickness (mm) 135 140 145 150 155 160 165 170 175 180 185
R (m2.K/W) 3,85 4,00 4,15 4,25 4,40 4,55 4,70 4,85 5,00 5,15 5,30
Thickness (mm) 190 195 200 205 210 215 220 225 230 235 240
R (m2.K/W) 5,40 5,55 5,70 5,85 6,00 6,15 6,30 6,40 6,55 6,70 6,85
FIRE REACTION: Euroclass E

OTHER CERTIFIED CHARACTERISTICS :
Thickness tolerance (30 to 240 mm) T1
Compressive stress (30 to 240 mm) CS(10/Y) 300
Tensile strength perpendicular to the faces (30 to 240 mm) TR200
Dimensional stability under specified temperature and humidity conditions DS (70,90)
Deformation under compressive load and specified temperature conditions (30 to 240 mm) DLT (2) 5
Compressive creep (30 to 240 mm): CC(2/1.5/50)130
Long term water absorption by total immersion (30 to 240 mm): WL (T) 0.7
Water absorption by diffusion (30 to 45 mm) WD(V)3
Water absorption by diffusion (50 to 75 mm) WD(V)2
Diffusion water absorption (80 to 240 mm) WD(V)1
Freeze-thaw resistance (30 to 240 mm) FTCD1
ISOLE use profile
Levels of suitability for use
Compression Dimensional stability Water behavior Cohesion Water vapor permeance
Thicknesses(mm) I S O L E
30 to 95                  5 1 3 4 3
100 to 200           5 1 3 4 4
205 to 240           3 1 3 4 4
Critical compressive strength :
from 30 to 240 mm: RCS ≥ 180 kPa Min. ds value. 0.7 % Max. ds-value : 1,7 %