Publiceer je producten
Lightweight slabs - U-BOOT® BETON

Lightweight slabs - U-BOOT® BETON

Disposable formwork for two-way voided slabs in reinforced concrete cast on site

U-Boot® Beton is a recycled polypropylene formwork that was designed to create lightened slabs and rafts. The use of U-Boot® Beton formwork makes it possible to create mushroom pillars, with the possibility to have the mushroom in the thickness of the slab.
Thanks to the conic elevator foot, immerging the U-Boot® Beton formworks in the concrete casting will create a gridwork of mutually perpendicular beams closed from the bottom and the top by a flat plate that is built with a single casting; this results in considerable reduction in the use of concrete and steel.
The product is available also in the U-Boot® Beton Cone version, provided with a central cone that facilitates the execution operations. In fact, it allows a visual check of the completion of the lower slab, a better yield of the exterior finishing of the intradox, the decrease of the lifting force during casting, a greater resistance to walkability, the air vent.

U-Boot® Beton is used to create slabs with large span or that are able to support large loads without beams.
Light and quick and easy to position, thanks to their modularity the designer can vary the geometric parameters as needed to adapt to all situations with great architectural freedom.

Specificatie
  • Supply of lightening formwork U-Boot® Beton and its accessories, for the execution of a reinforced concrete slab, with a bidirectional capacity, to be casted on suitable horizontal formwork (or on a prefabricated slab).

    Total slab thickness is ______ cm lightened in compliance with the design, with recycled plastic elements such as U-Boot® Beton of the Daliform Group Company, truncated-pyramid in shape with a crossed semi-cylindrical notch at the top to put reinforcement bars or installations to be integrated in the casting. U-Boot® Beton has got plan dimensions equal to 52 x 52 cm and height equal to H ______ cm, with the four semi-circular notched corners at the base of which the conic elevator foot is created, in integral way, facing down, with a height equal to H ______ cm, basing on the scaffolding to form the thickness of the intrados suitably reinforced with bidirectional mesh of reinforcing bars in steel type B450C, with diameter and spacing adapted to the design stresses.

    The supply includes positioning of the U-Boot® Beton modules with rigid spacer joints to form a link and thus create the perpendicular ribs between the formworks according to the predefined thickness and ensure the perfect geometry and bearing capacity upon casting, to be placed at the top of them inside the notches.

    The supply and casting of the concrete (minimum resistance class equivalent to C25/30, consistency class Slump S4 or S5 and diameter of the aggregates such to avoid “segregation” phenomena) is also included. The lower slab must be made, in a first phase, by casting the concrete and vibrating it until it covers the entire U-Boot® Beton feet (max 4 cm above them in case of Double type lightening). In a second phase, the completion casting will continue as soon as the first layer has lost fluidity (in this second phase a class of concrete consistency other than the previous one is allowed).

    The U-Boot® Beton modules, produced in ALAPLEN® CV30, must be safe to walk on and certified with a resistance characteristic of 150 kg in the weakest point on an 8 x 8 cm footprint; they must not release any polluting substances and must have a Certificate of Compliance with the environmental compatibility criteria (CCA) and be produced by a company using an Integrated Management System (ISO 9001, ISO 14001, ISO 45001, SA 8000).

    The final design of the voided slabs must have graphs and calculations provided by the Company supplying the U-Boot® Beton, which must exhibit the product certificate approved by an EOTA member Body (European Organisation for Technical Approvals).

    The Manufacturer must provide: the Technical and Safety Data Sheet of the product and as well as that of the granule used ALAPLEN® CV30; a Certificate of acoustic behaviour that shows the raw minimum value of the sound insulation of the bare floor (Rw) equal to 56 dB, and a value of the noise level of footing of the bare floor (Ln,w) maximum of 82 dB verified on a lightened slab type of thickness equal to 26 cm (5 + 16 + 5), issued by certified Third Parties.

    With reference to fire regulations, the Manufacturer must provide fire behaviour test, issued by an accredited Body, which demonstrates for a voided slab of 25 cm thickness (5 + 16 + 4) a fire resistance REI 180 with a design moment of at least 4880 daNm and minimum concrete cover of 3 cm, and which also demonstrates that the behaviour of the U-Boot® Beton feet is similar to that of overpressure relief valves, and therefore it is not necessary to provide suitable vents for overpressure (as, on the contrary, it is necessary for lightening in polystyrene or similar materials). Moreover the Manufacturer will have to provide a detailed study, conducted by an EOTA member accredited Body, of the fire behaviour of a lightened slab with elements in recycled plastic, executed on scaled samples from which the isothermal temperature propagation curves inside the slab can be deduced.

    In addition, the manufacturer shall provide, on request, appropriate certifications relating experimental test that proving the bi-directional resistant mechanism of the system, namely its actual behaviour as a slab, and appropriate certifications relating to tests of slab-column node, in order to provide the system’s ability to perform, in a seismic zone, its secondary system function supported to a primary system of ductile bracings.

    The cost for the creation of holes with the dimensions and sections foreseen by the architectural drawings is also included, the price also includes and covers all costs for providing the finished work in a workmanlike manner; it does not include the supply and positioning of the horizontal formwork that supports the slab and accessories, the steel reinforcements, which will be entered separately.

    Cost Euro/sqm _______________________________

Technische specificatie
  • Unieke ref.voided-slabs-uboot-beton-for-standard-use
  • ProductfamilieVoided slabs
  • ProductgroepU-BOOT® BETON
  • TypeObject (enkelvoudig object)
  • Publicatiedatum2019-07-11
  • Editienummer1
Gerelateerd
  • HoofdmateriaalPlastic
  • Secundair materiaalPlastic
  • Ontworpen inItalië
  • Gefabriceerd inItalië
Classificatie
  • Categorie BIMobjectBouw - Dek- en vloerplaten
  • IFC-classificatieMateriaal
  • UNSPSC-naamFlooring
  • UNSPSC-code301617
  • Uniclass 2015-codePr_20_85_13
  • Uniclass 2015-beschrijvingConcrete base and foundation products
  • OmniClass-nummer23-13 31 17
  • OmniClass-titelConcrete Formwork

Beschikbaarheid regio

Europa Azië Noord Amerika Afrika Zuid-Amerika Oceanië
Åland
Afghanistan
Amerikaanse Maagdeneilanden
Algerije
Argentinië
Amerikaans Samoa
Albanië
Armenië
Anguilla
Angola
Bolivia
Australië
Andorra
Azerbeidzjan
Antigua en Barbuda
Benin
Brazilië
Cookeilanden
België
Bahrein
Aruba
Botswana
Chili
Fiji
Bosnië en Herzegovina
Bangladesh
Bahama's
Burkina Faso
Colombia
Frans-Polynesië
Bulgarije
Bhutan
Barbados
Burundi
Ecuador
Guam
Cyprus
Brits Indische Oceaanterritorium
Belize
Centraal Afrikaanse Republiek
Falklandeilanden (Islas Malvinas)
Kiribati
Denemarken
Brunei
Bermuda
Comoren
Frans-Guyana
Kleine Afgelegen Eilanden van de Verenigde Staten
Duitsland
Cambodja
Britse Maagdeneilanden
Congo-Brazzaville
Guyana
Marshalleilanden
Estland
China
Canada
Congo-Kinshasa
Paraguay
Micronesia
Faeröer
Christmaseiland
Caribisch Nederland
Djibouti
Peru
Nauru
Finland
Cocoseilanden
Costa Rica
Egypte
Suriname
Nieuw-Caledonië
Frankrijk
Filipijnen
Cuba
Equatoriaal-Guinea
Uruguay
Nieuw-Zeeland
Gibraltar
Georgië
Curaçao
Eritrea
Venezuela
Niue
Griekenland
Hongkong
Dominica
eSwatini
Noordelijke Marianen
Guernsey
India
Dominicaanse Republiek
Ethiopië
Oost-Timor
Hongarije
Indonesië
El Salvador
Gabon
Palau
Ierland
Irak
Grenada
Gambia
Papoea-Nieuw-Guinea
IJsland
Iran
Groenland
Ghana
Pitcairneilanden
Isle of Man
Israël
Guadeloupe
Guinee
Samoa
Italië
Japan
Guatemala
Guinee-Bissau
Solomoneilanden
Jersey
Jemen
Haïti
Ivoorkust
Territorium Norfolkeiland
Kroatië
Jordanië
Honduras
Kaapverdië
Tokelau
Letland
Kazachstan
Jamaica
Kameroen
Tonga
Liechtenstein
Kirgistan
Kaaimaneilanden
Kenia
Tuvalu
Litouwen
Koeweit
Martinique
Lesotho
Vanuatu
Luxemburg
Laos
Mexico
Liberia
Wallis en Futuna
Malta
Libanon
Montserrat
Libië
Moldavië
Macau
Nicaragua
Madagaskar
Monaco
Maldiven
Panama
Malawi
Montenegro
Maleisië
Porto Rico
Mali
Nederland
Mongolië
Saint Kitts en Nevis
Marokko
Noord-Macedonië
Myanmar (Birma)
Saint Martin
Mauritanië
Noorwegen
Nepal
Saint Vincent en de Grenadines
Mauritius
Oekraïene
Noord-Korea
Saint-Barthélemy
Mayotte
Oostenrijk
Oezbekistan
Saint-Pierre en Miquelon
Mozambique
Polen
Oman
SaintLucia
Namibië
Portugal
Pakistan
Sint Maarten
Niger
Roemenië
Palestina
Trinidad en Tobago
Nigeria
Rusland
Qatar
Turks- en Caicoseilanden
Réunion
San Marino
Saudi-Arabië
Verenigde Staten
Rwanda
Servië
Singapore
Sao Tomé en Principe
Slovenië
Sri Lanka
Senegal
Slowakije
Syrië
Seychellen
Spanje
Tadzjikistan
Sierra Leone
Spitsbergen
Taiwan
Sint-Helena
Tsjechië
Thailand
Somalië
Vaticaanstad
Turkije
Sudan
Verenigd Koninkrijk
Turkmenistan
Tanzania
Wit-Rusland
Verenigde Arabische Emiraten
Togo
Zweden
Vietnam
Tsjaad
Zwitserland
Zuid-Korea
Tunesië
Uganda
Westelijke Sahara
Zambia
Zimbabwe
Zuid-Afrika
Zuid-Soedan