VS 65/150 M

Pump for hot for water circulation in pressurised closed circuit, or open circulation type, domestic heating and air conditioning systems. Operating range: from 0,6 a 3,7 m3/h with head of up to 6 metres. Copper piping welded union connectors: Ø 22 mm Ø 28 mm. Working pressure: 10 bar (1000 kPa). Liquid temperature range: from -10 °C to +85 °C for sanitary uses, and +110 °C for other uses. To avoid the formation of calcium, do not exceed 65 °C, and include a calcium removal system when the hardness of the water exceeds 15 French degrees.

Specificatie

Pump for hot water circulation in hot water domestic systems of the closed and pressurised or open tank type. Also suitable for solar power systems. Single body formed of the bronze hydraulic unit. Die-cast aluminium motor casing. Technopolymer impeller. Alumina driving shaft mounted on graphite brushings lubricated by the pumped liquid itself. Stainless steel protective rotor sleeve, stator sleeve and closing flange. Ceramic thrust bearing, E.P.D.M. “O” rings. The two-pole asynchronous motor with wet rotor is selfprotected for resistance. No overload protection required. Operating range: from 0.5 to 3,6 m3/h with head up to 6 metres. Liquid temperature range: from -10°C to +85°C (for sanitary use) +110°C (for others use). Pumped liquid characteristics: clean, free from solids and mineral oils, non viscous, chemically neutral, close to the characteristics of water (max 30% glycol). Maximum working pressure 10 bar (1000 kPa). Protection level IP 44 Insulation class F Cable grommet PG 11 Installation with motor axis horizontal

Technische specificatie

Unieke ref.VS-65-150-M
ProductfamilieCirculators
ProductgroepWet Rotor Electronic Circulators
TypeObject (enkelvoudig object)
Publicatiedatum2019-08-19
Editienummer1

Links

Product-urlhttps://www.dabpumps.com/en/products/circulators/wet-rotor-circulators/vs
Installatie-instructieshttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_60161045.pdf
Technische beschrijvinghttps://www.dabpumps.com/sites/default/files/2016-03/VS_TS_ENG.pdf

Gerelateerd

HoofdmateriaalBronze
Secundair materiaalPlastic
Ontworpen inItalië
Gefabriceerd inItalië

Classificatie

Categorie BIMobjectLoodgieterswerk - Pompen
UNSPSC-naamCirculating pumps
UNSPSC-code40151504
CSI MasterFormat 2014 Code22 35 23
CSI MasterFormat 2014 TitelCirculating, Domestic Water Heat Exchangers

Beschikbaarheid regio

Europa
Åland
Albanië
Andorra
België
Bosnië en Herzegovina
Bulgarije
Cyprus
Denemarken
Duitsland
Estland
Faeröer
Finland
Frankrijk
Gibraltar
Griekenland
Guernsey
Hongarije
Ierland
IJsland
Isle of Man
Italië
Jersey
Kroatië
Letland
Liechtenstein
Litouwen
Luxemburg
Malta
Moldavië
Monaco
Montenegro
Nederland
Noord-Macedonië
Noorwegen
Oekraïene
Oostenrijk
Polen
Portugal
Roemenië
Rusland
San Marino
Servië
Slovenië
Slowakije
Spanje
Spitsbergen
Tsjechië
Vaticaanstad
Verenigd Koninkrijk
Wit-Rusland
Zweden
Zwitserland