Publiceer je producten
PULSAR

PULSAR

Pulsar by DAB is a 5-inch multi stage impeller single block submersible pump. Designed to increase water pressure, gardening and irrigation and water drawing from the underground in residential building service. These pumps can operate immersed in wells (of at least 5") and first collection tanks or cisterns and can increase the water pressure. Suction takes place through a filter located in the lower part of the pump. The motor of the Pulsar pump is located above the hydraulic part and is cooled by the pumped liquid. Robust components allow the pump to run dry for short periods. Impellers and diffusers are made in technopolymer. 15-meter power cable, thermoamperometric protection and starting capacitor included in the single-phase version. The single-phase version is also available without the capacitor, this version must be combined with a control panel supplied as an accessory. Protection by the user in the three-phase version.

Specificatie
  • Flow rate maximum: From 0,9 m3/h a 7,2 m3/h
    Head up to: 88 m
    Maximum immersion depth: 20 m (12 meters on the plate for 15m cable length)
    Type of pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
    Sand quantity: 50 g/m3
    Liquid temperature range: From 0°C to +40°C
    Thread: 1" 1/4 GAS
    Pump maximum diameter: 138 mm
    Impeller/s material: Technopolymer
    Maximum number of starts: 20/h
    Non-stop service: IP 68
    Protection class: F
    Motor insulation class: 230 V 50 Hz
    Power cable (m) and plug: 3x230 V 50 Hz / 3x400 V 50 Hz
    Single phase power input: 15 m H07RN-F
    Possible type of installation: Fixed or removable, in vertical or horizontal position
    Special versions on request: Different voltages and frequencies, different cable length
    Certification: CB report is available

Technische specificatie
  • Unieke ref.pulsar
  • ProductfamilieSubmersible Pumps
  • ProductgroepSubmersible Monobloc Multistage Pumps 5''
  • TypeObject (enkelvoudig object)
  • Publicatiedatum2022-11-10
  • Editienummer1
Gerelateerd
  • HoofdmateriaalRoestvrij staal
  • Secundair materiaalRoestvrij staal
Classificatie
  • Categorie BIMobjectLoodgieterswerk - Pompen
  • IFC-classificatiePipe Fitting
  • ETIM-codeEC010733
  • ETIM-naamSubmersible wastewater pump
  • UNSPSC-naamSubmersible pumps
  • UNSPSC-code40151513
  • Uniclass 2015-codePr_65_53_24_86
  • Uniclass 2015-beschrijvingSubmersible pumps
  • CSI MasterFormat 2014 Code22 13 29.16
  • CSI MasterFormat 2014 TitelSubmersible Sewerage Pumps
  • OmniClass-nummer23-27 17 00
  • OmniClass-titelPumps
  • CSI UniFormat II-codeD2090
  • CSI UniFormat II-titelOther Plumbing Systems

Beschikbaarheid regio

Europa
Åland
Albanië
Andorra
België
Bosnië en Herzegovina
Bulgarije
Cyprus
Denemarken
Duitsland
Estland
Faeröer
Finland
Frankrijk
Gibraltar
Griekenland
Guernsey
Hongarije
Ierland
IJsland
Isle of Man
Italië
Jersey
Kroatië
Letland
Liechtenstein
Litouwen
Luxemburg
Malta
Moldavië
Monaco
Montenegro
Nederland
Noord-Macedonië
Noorwegen
Oekraïene
Oostenrijk
Polen
Portugal
Roemenië
Rusland
San Marino
Servië
Slovenië
Slowakije
Spanje
Spitsbergen
Tsjechië
Vaticaanstad
Verenigd Koninkrijk
Wit-Rusland
Zweden
Zwitserland

Soortgelijke producten

4.2 out of 5 stars 4.2 (27)
4.6 out of 5 stars 4.6 (16)
4.1 out of 5 stars 4.1 (12)
4.6 out of 5 stars 4.6 (5)
4.9 out of 5 stars 4.9 (21)