Publiceer je producten
WPM 810 - Elastomeric, single component, polyurethane based cold liquid applied waterproofing membrane

WPM 810 - Elastomeric, single component, polyurethane based cold liquid applied waterproofing membrane

WPM 810 is a single component; high performance polyurethane based cold applied elastomeric waterproofing membrane. WPM 810 exhibits high elasticity, excellent bond and low water permeability and makes it ideal for a wide range of waterproofing applications. The cured membrane forms an elastic, seamless, waterproof coating with good crack-bridging properties.

FEATURES
• Non Toxic: eco friendly coating
• Seamless cold-applied membrane: eliminates lapping, seaming, and pre-cutting
• Highly flexible: can accommodate movements and vibrations
• Root Resistant
• Outstanding barrier properties: ensures protection against corrosive soil conditions
• Thermally stable: irreversible chemical cure, eliminates melting and flow at high temperature
• Excellent adhesion to concrete substrates
• Excellent resistance to oxidation
• Good chemical resistance to most weak acids and alkali, water borne salts and sea water

Ardex Endura

Specificatie
  • Appearance: Viscous becomes black after drying
    Viscosity: max. 75 poise
    Drying time: 45 – 50 mins depending upon temperature or humidity
    Specific gravity (IS 101/1964): 1.60 ± 0.1
    Solid Content (IS 101/1964): 80 %
    Elongation (ASTM D 412): >500 %
    Crack Bridging: 2mm
    Tensile Strength (ASTM D 412): 1 to 1.5 N/Sqmm
    Water Vapour transmission for 1.33 mm film: 9.7 g/sqm/24 hrs
    Water absorption: Nill at 1mm
    Permeability (ASTM E 96): Passes test
    Recovery after 100% Elongation (ASTM D 412): > 85%
    Shore A hardness (ASTM D 2240): > 60
    Flashpoint: 45 Deg C to 60 Deg C
    Service Temperature: minus 10 Deg C to 45 Deg C
    Coverage: Approximately 18 m² @ 1mm
    Pack Size: 20 kg

    Ardex Endura

Technische specificatie
  • Unieke ref.wpm-810
  • ProductfamilieWaterproofing Systems
  • ProductgroepLIQUID APPLIED WATERPROOFING
  • TypeObject (enkelvoudig object)
  • Publicatiedatum2019-08-24
  • Editienummer2
Gerelateerd
  • HoofdmateriaalPolyurethaan
  • Ontworpen inIndia
  • Gefabriceerd inIndia
Classificatie
  • Categorie BIMobjectBouwmaterialen - Waterproofing & Membranes
  • IFC-classificatieFloor
  • Uniclass 2015-codeSs_32
  • Uniclass 2015-beschrijvingDamp proofing, waterproofing and plaster finishing systems
  • CSI MasterFormat 2014 Code07 20 00
  • CSI MasterFormat 2014 TitelThermal Protection
  • OmniClass-nummer23-13 25 00
  • OmniClass-titelThermal and Moisture Protective Products 
  • CSI UniFormat II-codeC3020
  • CSI UniFormat II-titelFloor Finishes

Beschikbaarheid regio

Azië
India