R 70 CP - Medium Duty Polyurethane Screed (2 – 5 mm)

R 70 CP is a polyurethane resin flooring system having outstanding wearing properties with high chemical resistance and pleasing decorative finish. Ideally suited in aggressive areas where a seamless, joint free finish is required and maximum cleanliness is essential. Suitable for use from 2mm up to 5mm thickness.

COLOURS
Available in a range of colours

FEATURES
• Hard wearing: extremely durable and abrasion resistant with low maintenance cost
• Facilitates rapid application: can be applied on 7 days old concrete or 2 days old polymer screeds
• Resistant to a wide range of chemicals and liquids
• Seamless: easily cleanable to maintain high standards of hygiene
• High Impact resistance: Classified ‘High Impact Resistance’ under BS 8204: Part 1: 1999
• Supplied in pre-measured packs for ease of mixing and consistency at site
• Food grade: CFTRI approved; conforms to the specifications as per U.S FDA 175.300

Ardex Endura

Specificatie

Mixed density: 1.88 g/cc
Pot life: 15 to 20 min
Light traffic: 24 hrs
Full traffic : 48 hrs
Full cure: 7 days
Bond strength (ASTM D 4541): > 1.5 N/Sqmm
Compressive strength (BS 6319 Part 2): > 40 N/Sqmm
Flexural strength (BS 6319 Part 3): > 15 N/Sqmm
Tensile strength (BS 6319 Part 7): > 6 N/Sqmm
Shore D Hardness (ASTM D 2214): >75
Coefficient of thermal expansion (per 0C) ASTM C531: 7.64x10-5
Service Temperature: -25 Deg C to 60 Deg C
Abrasion resistance: Classified 'Special Duty' under BS 8204:Part 2
Slip resistance: Classified 'Satisfactory' under BS 8204:Part 2, wet and dry
Impact resistance: Classified ‘High Impact, Resistance’ under BS 8204: Part 1: 1999.
Coverage: Approximately 5.32 m² @ 2 mm thickness
Pack Size: 20 kg
Ardex Endura