Publiceer je producten
Model 8611 Corner RiserPACK
Model 8611 Corner RiserPACK
Model 8611 Corner RiserPACK
Model 8611 Corner RiserPACK

Model 8611 Corner RiserPACK

4.6 out of 5 stars4.6(12 reviews)

AGF's commercial RiserPACK Model 8611 is a riser manifold for NFPA 13 fire sprinkler systems and is designed to fit into a corner to minimize protruding and comply with ADA Standards. Model 8611 includes a flow switch, TESTanDRAIN Model 1011A with included pressure relief valve and trim, Model 7600 3-way universal gauge valve, and a Model 7500 pressure gauge. Available with a steel body in sizes 2"-6", orifice sizes 3/8" (K 2.8) - 25K, and a groove x groove connection. AGF's corner manifold is available with a right or left drain to accommodate every installation configuration.

Specificatie
  • Model 8611 Commercial Corner RiserPACK

    1. 2.1 SPRINKLER SPECIALTY PIPE FITTINGS - Flow Detection and Test Assemblies:
      1. Product: Commercial Model M8611. Includes a flow switch, TESTanDRAIN Model 1011A, Model 7600 3-way Globe Valve, and a M7500 Pressure Gauge and a model M7000 Pressure Relief Valve.
        1. Riser Model: Pre-Assembled TESTanDRAIN Riser 2, 2-1/2, 3, 4, and 6 inches (51mm, 64 mm, 76 mm, 102 mm, 152 mm):
          1. Inlet and Outlet (Schedule 10 steel): Grooved 2, 2-1/2, 3, 4 and 6 inches (51mm, 64 mm, 76 mm, 102 mm, 152 mm) Models.
          2. Schedule 10 fabricated steel body with 3mil (.08 mm) powder coated red finish.
          3. Standard: UL's "Product iQ" listing, or "Approval Guide," published by FM Global, listing. NFPA 13.
          4. Pressure Rating: 300 psig (2070 kPa).
          5. Size: Same as connected piping.

    ** NOTE TO SPECIFIER ** Delete valve not required.

    1. Valve Model 1011 TESTanDRAIN valve for a 2 inch (51 mm) Model:
      1. 1 inch (25 mm) FNPT.

    ** NOTE TO SPECIFIER ** Delete orifice size not required.

    1. Test Orifice Size: Nominal 2.8K (3/8 inch) , as required by NFPA 13, latest edition.
    2. Test Orifice Size: Nominal 4.2K (7/16 inch), as required by NFPA 13, latest edition.
    3. Test Orifice Size: Nominal 5.6K (1/2 inch), as required by NFPA 13, latest edition.
    4. Test Orifice Size: Nominal 8.0K (17/32 inch), as required by NFPA 13, latest edition.
    5. Test Orifice Size: Nominal 11.2K (5/8 inch, ELO), as required by NFPA 13, latest edition

    ** NOTE TO SPECIFIER ** Delete orifice size not required.

    1. Test Orifice Size: Nominal 2.8K (3/8 inch) , as required by NFPA 13, latest edition.
    2. Test Orifice Size: Nominal 4.2K (7/16 inch), as required by NFPA 13, latest edition.
    3. Test Orifice Size: Nominal 5.6K (1/2 inch), as required by NFPA 13, latest edition.
    4. Test Orifice Size: Nominal 8.0K (17/32 inch), as required by NFPA 13, latest edition.
    5. Test Orifice Size: Nominal 11.2K (5/8 inch, ELO), as required by NFPA 13, latest edition.
    6. Test Orifice Size: Nominal 14.0K (3/4 inch, ESFR), as required by NFPA 13, latest edition.
    1. Valve Model 1011 TESTanDRAIN valve for a 4 or 6 inch (102 mm, 152 mm) Models:
      1. 2 inch FNPT.

    ** NOTE TO SPECIFIER ** Delete orifice size not required.

    1. Test Orifice Size: Nominal 2.8K (3/8 inch) , as required by NFPA 13, latest edition.
    2. Test Orifice Size: Nominal 4.2K (7/16 inch), as required by NFPA 13, latest edition.
    3. Test Orifice Size: Nominal 5.6K (1/2 inch), as required by NFPA 13, latest edition.
    4. Test Orifice Size: Nominal 8.0K (17/32 inch), as required by NFPA 13, latest edition.
    5. Test Orifice Size: Nominal 11.2K (5/8 inch, ELO), as required by NFPA 13, latest edition.
    6. Test Orifice Size: Nominal 14.0K (3/4 inch, ESFR), as required by NFPA 13, latest edition.
    7. Test Orifice Size: Nominal 25.2K, as required by NFPA 13, latest edition.
    8. Water flow alarm switch.
    9. Pressure Gauge: AGF Model 7500.
    10. 1/4 inch, 3-way globe valve: AGF Model 7600
    11. Pressure Relief Valve and Drainage Piping: AGF Model 7000 or AGF Lockable Model 7000L

    ** NOTE TO SPECIFIER ** Delete pressure rating not required.

    1. Pressure Rating: Factory rated at 175 PSI.
    2. Pressure Rating: 200 PSI.
    3. Pressure Rating: 225 PSI.
    4. Pressure Rating: 300 PSI.
    5. Body Material: Bronze body and stainless steel spring.
    6. Components: Nylobraid flexible tube, Two 1/2 inch (13 mm) NPT by barbed 90 degree elbows, external identification plate and integral flushing handle to remove debris.
    7. 1/2 inch (13 mm) MIPT inlet, 1/2 inch (13 mm) FIPT outlet.
    8. Relief pressure shall be factory set to project specifications.
    9. Relief valve shall operate to the OPEN position between 90% and 105% of the set pressure.
    10. Relief valve shall reseat or CLOSE at a minimum of 80% of set pressure.
Technische specificatie
  • Unieke ref.AGF-Corner-Riser
  • ProductfamilieAGF Fire Sprinkler Products
  • ProductgroepRiserPACK®
  • Publicatiedatum2022-03-02
  • Editienummer1
Gerelateerd
  • HoofdmateriaalStaal met poedercoating
  • Ontworpen inVerenigde Staten
  • Gefabriceerd inVerenigde Staten
Classificatie
  • Categorie BIMobjectBrandwerende producten - Sproeisystemen
  • CSI MasterFormat 2014 Code21 00 00
  • CSI MasterFormat 2014 TitelFire Suppression
  • OmniClass-nummer23-29 33 00
  • OmniClass-titelFire Suppression System Components
  • CSI UniFormat II-codeD40
  • CSI UniFormat II-titelFIRE PROTECTION

Beschikbaarheid regio

Azië Europa Afrika Zuid-Amerika Oceanië Noord Amerika
Afghanistan
Albanië
Algerije
Argentinië
Australië
Bahama's
Armenië
België
Angola
Bolivia
Fiji
Belize
Azerbeidzjan
Bosnië en Herzegovina
Benin
Brazilië
Nieuw-Caledonië
Canada
Bangladesh
Bulgarije
Botswana
Chili
Nieuw-Zeeland
Costa Rica
Bhutan
Cyprus
Burkina Faso
Colombia
Oost-Timor
Cuba
Cambodja
Denemarken
Burundi
Ecuador
Papoea-Nieuw-Guinea
Dominicaanse Republiek
China
Duitsland
Centraal Afrikaanse Republiek
Falklandeilanden (Islas Malvinas)
Solomoneilanden
El Salvador
Filipijnen
Estland
Congo-Brazzaville
Frans-Guyana
Vanuatu
Groenland
Georgië
Finland
Congo-Kinshasa
Guyana
Guatemala
India
Frankrijk
Djibouti
Paraguay
Haïti
Indonesië
Griekenland
Egypte
Peru
Honduras
Irak
Hongarije
Equatoriaal-Guinea
Suriname
Jamaica
Iran
Ierland
Eritrea
Uruguay
Mexico
Israël
IJsland
eSwatini
Venezuela
Nicaragua
Japan
Italië
Ethiopië
Panama
Jemen
Kroatië
Gabon
Porto Rico
Jordanië
Letland
Gambia
Verenigde Staten
Kazachstan
Litouwen
Ghana
Kirgistan
Luxemburg
Guinee
Koeweit
Moldavië
Guinee-Bissau
Laos
Montenegro
Ivoorkust
Libanon
Nederland
Kameroen
Maleisië
Noord-Macedonië
Kenia
Mongolië
Noorwegen
Lesotho
Myanmar (Birma)
Oekraïene
Liberia
Nepal
Oostenrijk
Libië
Noord-Korea
Polen
Madagaskar
Oezbekistan
Portugal
Malawi
Oman
Roemenië
Mali
Pakistan
Rusland
Marokko
Palestina
Servië
Mauritanië
Qatar
Slovenië
Mozambique
Saudi-Arabië
Slowakije
Namibië
Sri Lanka
Spanje
Niger
Syrië
Spitsbergen
Nigeria
Tadzjikistan
Tsjechië
Rwanda
Taiwan
Verenigd Koninkrijk
Senegal
Thailand
Wit-Rusland
Sierra Leone
Turkije
Zweden
Somalië
Turkmenistan
Zwitserland
Sudan
Verenigde Arabische Emiraten
Tanzania
Vietnam
Togo
Zuid-Korea
Tsjaad
Tunesië
Uganda
Westelijke Sahara
Zambia
Zimbabwe
Zuid-Afrika
Zuid-Soedan