Sectional Steel Doors Model 2411

Wayne Dalton’s Model 2411 is a strong and visually appealing sectional steel door for moderate commercial applications and is available in a variety of sizes to fit most door openings. This sectional steel door features an embossed exterior skin with a stucco finish to enhance the door's appearance. C-shaped vertical stiles on the door’s interior provide added strength and allow a quick, secure hinge attachment. It also features end stiles that wrap around the exterior of each section to protect the section face from wear caused by the door jambs.

Model 2411's exterior ribbing consists of two deep and four shallow ribs in each section, making it ideal for moderate use. The bottom section features a vinyl bulb-shaped astragal, held by a roll-formed, hot-dipped galvanized steel retainer. Optional insulation consists of 1-5/16" expanded polystyrene which provides an R-value* of up to 7.64 and a U-value as low as 0.13.

*Wayne Dalton uses a calculated door section R-value for insulated doors.

BIM objects are for general reference and should not be used for exact construction information. Please contact a Wayne Dalton Dealer when exact dimensions are required.

사양

Key Product Features
- Max Width: 20’2”
- Max Height: 16’1”
- Nominal 24-gauge ribbed steel
- Optional polystyrene insulation, R-value* = 7.64
- 10,000 cycle standard spring
- Shiplap joint profile
*Wayne Dalton uses a calculated door section R-value for insulated doors.
Impact Panel
- Wayne Dalton’s optional Impact Section replaces the traditional bottom section on doors exposed to damage from forklifts and other warehouse traffic.
- Reduces downtime and costly repairs
- Impact-Resistant composite skins surround an expanded polystyrene core
- Fully adaptable to multiple door thicknesses with hinge and section adapters to provide a superior fit
- Available for 21" and 24" sections
- Available from 8’2” to 16’2” wide in one-foot increments
Options & Accessories
- Chain hoist operation
- Motor operation
- High cycle springs (25k, 50k, 100k)
- 3” track
- Solid shafts
- Perimeter weather seal
- Sensing edges
- Photo eyes
- Special track designs
- Mullions
Simple Install System
- This option is a time-saving, easy-to-install track and hardware system, perfect for warehouse applications.
- Components include: one-piece vertical lift track and simplified hardware
- Available only for nominal and 24-gauge commercial sectional steel doors
- Maximum size is 10’2” x 10’1” with a vertical lift track only
- Requires a 10-door minimum order offers a price deduction

기술 사양

특징 참조sectional-steel-door-2411
제품군Commercial Doors
제품분류Sectional Doors
유형개체 (단일 개체)
게시일2024-01-17
에디션 넘버1

링크

관련성

주 재료철
설계국가미국
제조국가미국

분류

BIMobject 카테고리문 - 산업용 문
IFC 분류문
CSI 마스터 형식 2014 코드08 36 13
CSI 마스터 형식 2014 제목Sectional Doors
OmniClass 번호23-17 11 13 25 13
OmniClass 제목Sectional Overhead Metal Doors

지역 가용성

북미
과들루프
과테말라
그레나다
그린란드
네덜란드령 카리브 해 지역
니카라과
도미니카
도미니카 공화국
마르티니크
멕시코
몬세라트
미국
미국령 버진아일랜드
바베이도스
바하마
버뮤다
벨리즈
생마르탱
생바르텔레미
생피에르앤드미클롱
세인트루시아
세인트빈센트그레나딘
세인트키츠네비스
신트마르턴
아루바
아이티
앤티가 바부다
앵귈라
엘살바도르
영국령 버진아일랜드
온두라스
자메이카
캐나다
케이맨 군도
코스타리카
쿠바
퀴라소
터크스케이커스 제도
트리니다드토바고
파나마
푸에르토리코