Insulated Sectional Steel Doors Thermospan® Model 200

Wayne Dalton Thermospan® Model 200 provides premium thermal efficiency and low maintenance costs, resulting in a door that costs less to own. Continuous foamed-in-place polyurethane insulation and a non-conductive thermal break between the inner and outer skins combine to provide a U-value* of .057 and an R-value* of 17.50.

The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available. The Thermospan® Series also has a patented manufacturing process with a polyurethane core that is continuously foamed-in-place between the outer and inner skins. An innovative thermal break keeps the interior skin at room temperature, preventing condensation and frost and helping to resist corrosion.

*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.

BIM objects are for general reference and should not be used for exact construction information. Please contact a Wayne Dalton Dealer when exact dimensions are required.

사양

Key Product Features
- Max Width: 40’2”
- Max Height: 32’1”
- Polyurethane insulation, R-value* = 17.5, U-value* = .057
- 2” section thickness
- 10,000 cycle standard spring
- Patented, roll-formed integral struts for rigidity
- Embossed stucco exterior with pinstripes
*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.
Door Construction
- Joint seal prevents air infiltration and saves energy
- Thermal break separates inner and outer skins so virtually no heat or cold is conducted through the section.
- Pre-painted inner and outer skins for added corrosion resistance. Both skins are also hot-dipped galvanized steel for further protection against corrosion.
- Solid polyurethane core provides maximum thermal efficiency and aids in quiet operation
- Integral struts – Two 1-3/4” roll-formed struts per section increase rigidity and strength.
- Two-inch nominal thickness
- Embossed pinstriping (grooves) on the embossed stucco outer skin adds strength and enhances appearance.
IECC® Compliant
The Thermospan® Model 200 meets IECC® requirements for maximum U-factor of operable fenestrations (2015 Section C402.4) with a 3rd party certified tested value of less than 0.37. Thermospan® Model 200 also meets the ASHRAE 90.1 and IECC® requirement for maximum air leakage for fenestration assemblies (2015 Section C402.5.2 Garage doors) with a 3rd party certified tested value of less than 0.40.
Options & Accessories
- Pass door
- Chain hoist operation
- Motor operation
- Sensing edges
- Photo eyes
- High cycle spring (25k, 50k, 100k)
- 3” track option
- Solid shafts
- Perimeter weather seal
- Special track designs
- Mullions
Impact Panel
Wayne Dalton’s optional Impact Section replaces the traditional bottom section on doors exposed to damage from forklifts and other warehouse traffic.
Reduces downtime and costly repairs
Impact-Resistant composite skins surround an expanded polystyrene core
Fully adaptable to multiple door thicknesses with hinge and section adapters to provide a superior fit
Available for 21" and 24" sections
Available from 8’2” to 16’2” wide in one-foot increments

기술 사양

특징 참조insulated-sectional-steel-door-200
제품군Commercial Doors
제품분류Sectional Doors
유형개체 (단일 개체)
게시일2023-12-08
에디션 넘버1

링크

북미
과들루프
과테말라
그레나다
그린란드
네덜란드령 카리브 해 지역
니카라과
도미니카
도미니카 공화국
마르티니크
멕시코
몬세라트
미국
미국령 버진아일랜드
바베이도스
바하마
버뮤다
벨리즈
생마르탱
생바르텔레미
생피에르앤드미클롱
세인트루시아
세인트빈센트그레나딘
세인트키츠네비스
신트마르턴
아루바
아이티
앤티가 바부다
앵귈라
엘살바도르
영국령 버진아일랜드
온두라스
자메이카
캐나다
케이맨 군도
코스타리카
쿠바
퀴라소
터크스케이커스 제도
트리니다드토바고
파나마
푸에르토리코