제품 게시
WCF-PESF - MONT BLANC - Polyester injection anchor

WCF-PESF - MONT BLANC - Polyester injection anchor

WCF-PESF / WCF-PESF-E MONT BLANC for low and medium loads
Polyester is a low to medium performance level, cost effective, general purpose two-component (10:1 ratio), styrene-free chemical anchoring system with unsaturated polyester as chemical base, that has been formulated for anchoring in a wide variety of building materials. Ideal for standard DIY applications in uncracked concrete and masonry substrates.

SUBSTRATES
• Uncracked concrete (option 7) C20/25 to C50/60.
• Reinforced and non-reinforced concrete.
• Dry, wet concrete and flooded holes (Cat 2).
• Masonry substrate.

INSTALLATION TEMPERATURE RANGE
WCF-PESF-410 - for normal installation conditions: 5°C to 30°C
WCF-PESF-E-410 - for summer (tropical) installation conditions: 10°C to 45°C
WCF-PESF-C-410 - for winter installation conditions: -10°C to 30°C

CARTRIDGE SIZE
WCF-PESF-E-300 - 300 ml
WCF-PESF-410 - 410 ml
WCF-PESF-E-410 - 410 ml

APPROVED STEEL ELEMENTS
• Threaded rods M8-M24 made of galvanized steel grades: 5.8, 8.8, 10.9;
• Threaded rods M8-M24 made of stainless steel grades: A2-70, A4-70, A4-80;
• Threaded rods M8-M24 made of HCR steel: 1.4529 and 1.4565;
• Galvanized or hot-dip galvanized rods and thermodiffusion galvanized bars;;

APPLICATIONS
• Anchoring of base plates, brackets, consoles when load-bearing capacity is less critical.
• Fastenings in safety related non-structural applications e.g. handrails, guard rails, canopies, cantilevers, etc.
• DIY anchoring applications into wide variety of building materials e.g. sanitary ware, fencing, gates, boilers, bicycle racks, awnings, etc.
• Design method according to EOTA Technical Report TR029, EN-1992-4:2018 and ETAG 029/Annex C/Design method A.

STYRENE-FREE
Being free of styrene is well suited and safe for use indoors and in confined spaces.

NO STRESS IN SUBSTRATE DURING INSTALLATION
By avoiding mechanical expansion, they do not introduce during installation stress into the substrate and can be installed close to each other and to substrate edges.

FAST CURING
Resin is designed to cure fast so you can load the fastening point earlier.

CONTENT 410 ml - COAXIAL CARTRIDGE
Increased volume - 410 ml for larger work scopes, the coaxial cartridge allows for easier portioning and allows for use of every cm3 of the product.

사양
  • MONT BLANC
    capacity    application temp.
    300 ml    5°C to 30°CWCF-PESF-300
    300 ml    10°C to 45°CWCF-PESF-E-300*
    300 ml    -10°C to 30°CWCF-PESF-C-300
    410 ml    10°C to 45°CWCF-PESF-E-410*

    *product available on request

    Basic parameters

    ParameterValue
    MaterialPolyester resin
    Ambient temperature [˚C]+5 - +30
    ColourGrey
    Curing systemCatalyst
기술 사양
  • 특징 참조wcf-pesf-mont-blanc-polyester-injection-anchor-for-low-and-medium-loads
  • 제품군Anchors
  • 제품분류Chemical anchors
  • 유형개체 (단일 개체)
  • 게시일2022-05-30
  • 에디션 넘버1
관련성
  • 설계국가폴란드
  • 제조국가폴란드
분류
  • BIMobject 카테고리건축 - Anchors & Fixings
  • IFC 분류건물 요소 프록시
  • UNSPSC 이름Structural products
  • UNSPSC 코드301036
  • Uniclass 2015 코드Pr_20_29_03_18
  • Uniclass 2015 설명Chemical anchors
  • CSI 마스터 형식 2014 코드05 05 19
  • CSI 마스터 형식 2014 제목Post-Installed Concrete Anchors
  • OmniClass 번호23-13 23 11 15 15
  • OmniClass 제목Bonded Anchors
  • CSI 단일 형식 II 코드E
  • CSI 단일 형식 II 제목EQUIPMENT & FURNISHINGS

지역 가용성

유럽 북미 아시아
네덜란드
미국
인도
덴마크
캐나다
독일
루마니아
리투아니아
벨기에
보스니아 헤르체고비나
스웨덴
스페인
슬로바키아
슬로베니아
영국
오스트리아
우크라이나
이탈리아
체코 공화국
크로아티아
폴란드
프랑스
헝가리