iN401 Slim Design Commercial Tankless System

Intellihot Inc (Tankless)

iN401 Slim Design Commercial Tankless System

Commercial Tankless on-demand water heater

KEY FEATURES

• Multiple Stainless (316L) Heat Exchangers
• Flexible-Floating Design, stress-relieving and thermal
shock resistant
• Built-in Redundancy - Multiple heat engines with individual controls
• Multi-Unit - Masterless cascading with common venting
• Gas Pressures - Operates on gas pressure range of 2.5"- 14" w.c.
• ASME-HLW Compliant
• Designed and Built in the U.S.
• 7" Color Touch Screen - access to usage data, troubleshooting, and parts wear
• Direct Cell-LTE Connectivity

PERFORMANCE

• Turndown Ratio of 13.3:1 per unit.
• Cascade up to 2 units with common venting for a total of
over 1,600MBH and a 53:1 total turndown ratio

Keyword: Tankless

사양

Type Indoor, Commercial, Floor Mounted, On-Demand Tankless Water Heater
Fuel Preset for NG / LP convertible without additional parts
Minimum Input (BTU/hr) 30,000
Maximum Input (BTU/hr) 399,999
Maximum Output (BTU/hr) 375,999
Thermal Efficiency 94%
Turn Down Ratio (TDR) 13.3:1
Water Inlet / Outlet Connections 1-1/2” NPT
Gas Inlet Connection 1-1/2” NPT
Condensate Drain Connection 3/4” PVC
Maximum Condensate Flow Rate (GPH) 2.8
Dimensions H X W X D (Inches) 67.5 X 20 X 20 (15 CU. FT)
Service Clearances Recommend 1” on all sides, 6” on the top, 12” in the front
Weight (LBS) 345 LBS
Venting Type Direct Vent (2 pipe - intake & exhaust), Power Vent (1 pipe - exhaust only, room air)
Venting Materials (USA) Sch. 40 PVC, Sch. 40 CPVC, Polypropylene, Stainless Steel
Venting Materials (Canada) Type BH Gas Vent Classes: II A (PVC), II B (CPVC), II C (Polypropylene), I (AL 29-4C SS)
Vent Size (Diameter) 4” Ø
Max Vent Length - Single Pipe / Power Vent* 250 FT
Max Vent Length - Two Pipe / Direct Vent* 125 FT
* Venting Note: From the maximum lengths above, deduct 5 ft. per 90° elbow and 2 ft. per 45° elbow
Ignition Electronic Spark Ignition
Temperature Range 100°F – 190°F
Temperature Stability +/- 4°F
Installation Location Ambient Temperature 40°F – 130°F
Safety
Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue Temperature Monitor, Blocked
Vent Detector, Dual Flame Sensing
Water Pressure Min / Max (PSIG) 30 / 160
NG/LP - Min. Dynamic Gas Pressure (Full Fire) 2.5” (non-corrugated, black iron)
NG/LP - Maximum Static Gas Pressure 14”
Gas Pressure for Adjustments 8” for NG, 11” for LP
Electrical 120V AC, 60 Hz
Power Consumption Max 9.5 Amps, 16W (Standby)
Internal Water Volume (gallons) 1
Tankless

기술 사양

특징 참조iN401
제품군Neuron
제품분류Commercial Tankless System - Free Standing Slim Design
유형개체 (단일 개체)
게시일2020-05-11
에디션 넘버1

링크

관련성

주 재료철
설계국가미국
제조국가미국

분류

BIMobject 카테고리HVAC - Water heaters
IFC 분류열 교환기
ETIM 코드EC000392
ETIM 이름Instantaneous water heater
UNSPSC 이름Commercial water heaters
UNSPSC 코드40101826
Uniclass 2015 코드Pr_60_60_96
Uniclass 2015 설명Water heaters
CSI 마스터 형식 2014 코드23 00 00
CSI 마스터 형식 2014 제목Heating, Ventilating, and Air Conditioning (HVAC)
OmniClass 번호23-31 29 11
OmniClass 제목Instantaneous Hot Water Heaters
CSI 단일 형식 II 코드D3090
CSI 단일 형식 II 제목Other HVAC Systems & Equipment

지역 가용성

북미	남아메리카
과들루프	가이아나
그레나다	수리남
네덜란드령 카리브 해 지역
도미니카
도미니카 공화국
마르티니크
몬세라트
미국
미국령 버진아일랜드
바베이도스
바하마
벨리즈
생마르탱
생바르텔레미
세인트루시아
세인트빈센트그레나딘
세인트키츠네비스
신트마르턴
아루바
아이티
앤티가 바부다
앵귈라
영국령 버진아일랜드
자메이카
캐나다
케이맨 군도
쿠바
퀴라소
터크스케이커스 제도
트리니다드토바고
푸에르토리코