제품 게시
i250 Commercial Tankless System - Wall Hung
i250 Commercial Tankless System - Wall Hung
i250 Commercial Tankless System - Wall Hung
i250 Commercial Tankless System - Wall Hung

    i250 Commercial Tankless System - Wall Hung

    Commercial Tankless on-demand water heater

    KEY FEATURES

    • Stainless (316L) Heat Exchanger
    • Flexible-Floating Design, stress-relieving and thermal shock resistant
    • Multi-Unit - Masterless cascading with common venting
    • Gas Pressures - Operates on gas pressure range of 2.5"- 14" w.c.
    • Designed and Built in the U.S.
    • 3.5" Color Touch Screen - access to usage data, troubleshooting, and parts wear

    PERFORMANCE

    • Turndown Ratio of 7:1 (i200) & 8.3:1 (i250) per unit.
    • Cascade up to 10 units with common venting for a total of
    over 2500MBH and a 83:1 total turndown ratio

    사양
    • Type Indoor/Outdoor, Wall-Hung, Fully Condensing, Commercial, Tankless, Direct Ignition
      Fuel Preset for NG / LP Convertible
      Minimum / Maximum Input (BTU/hr) 30,000 / 250,000
      Thermal Efficiency 92%
      Energy Factor N/A
      Dimensions H X W X D (Inches) 26.2 X 17.7 X 15 (3.9 CU. FT)
      Weight (LBS) 93 LBS
      Water and Gas Connections 3/4" NPT
      Minimum Flow Rate 0.6 GPM

      Max 3” Vent Length - Single Pipe / Power Vent 130 ft, deduct 5 ft per 90° elbow
      Max 3” Vent Length - Two Pipe / Direct Vent 65 ft, deduct 5 ft per 90° elbow
      Max 2” Vent Length - Single Pipe / Power Vent  (2” not allowed at elevations above 4,000 ft) N/A
      Max 2” Vent Length - Two Pipe / Direct Vent  (2” not allowed at elevations above 4,000 ft) N/A
      Installation Location Ambient Temperature 40°F – 130°F
      Safety Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue
      Temperature Monitor, Blocked Vent Detector, Water Shut-Off Valve, 2X10A Fuse, Dual
      Flame Sensing
      Water Pressure Min / Max (PSI) 30 / 150

      NG/LP - Minimum Static Gas Pressure 1/2” Black Iron (non-corrugated) 5”

      NG/LP - Minimum Static Gas Pressure 3/4” Black Iron (non-corrugated) 2.5”
      NG/LP - Minimum Dynamic Pressure at Full Firing Rate 0.5”
      NG/LP - Maximum Static Gas Pressure 14”
      Gas Pressure for Adjustments 8” for NG, 11” for LP
      Electrical 120V AC, 60 Hz
      Power Consumption 500W (Max 4.2 Amps), 8W (Standby)

    기술 사양
    • 특징 참조i250
    • 제품군i Series
    • 제품분류Commercial Tankless System - Wall Hung
    • 유형개체 (단일 개체)
    • 게시일2020-05-11
    • 에디션 넘버1
    관련성
    • 주 재료
    • 설계국가미국
    • 제조국가미국
    분류
    • BIMobject 카테고리HVAC - Water heaters
    • IFC 분류열 교환기
    • ETIM 코드EC000392
    • ETIM 이름Instantaneous water heater
    • UNSPSC 이름Commercial water heaters
    • UNSPSC 코드40101826
    • Uniclass 2015 코드Pr_60_60_96
    • Uniclass 2015 설명Water heaters
    • CSI 마스터 형식 2014 코드23 00 00
    • CSI 마스터 형식 2014 제목Heating, Ventilating, and Air Conditioning (HVAC)
    • OmniClass 번호23-31 29 11
    • OmniClass 제목Instantaneous Hot Water Heaters
    • CSI 단일 형식 II 코드D3090
    • CSI 단일 형식 II 제목Other HVAC Systems & Equipment

    지역 가용성

    북미 남아메리카
    과들루프
    가이아나
    그레나다
    수리남
    네덜란드령 카리브 해 지역
    도미니카
    도미니카 공화국
    마르티니크
    몬세라트
    미국
    미국령 버진아일랜드
    바베이도스
    바하마
    벨리즈
    생마르탱
    생바르텔레미
    세인트루시아
    세인트빈센트그레나딘
    세인트키츠네비스
    신트마르턴
    아루바
    아이티
    앤티가 바부다
    앵귈라
    영국령 버진아일랜드
    자메이카
    캐나다
    케이맨 군도
    쿠바
    퀴라소
    터크스케이커스 제도
    트리니다드토바고
    푸에르토리코