Fig. 199 - Heavy Welded Steel Bracket
How to size: Determine size by dimensions most suitable to the installation (see dimensions of standard brackets below). Special welded steel brackets can be furnished on order.
Installation: When bolted to a wall, an additional back plate may be required of such thickness and size as to properly distribute the weight over the wall. Size and thickness of the back plate is governed by the load to be carried and the nature and conditions of the wall. Back plates furnished upon request.
Features: If supporting pipe by rod, rod can be installed anywhere along the length of the bracket thus providing horizontal adjustment.
Ordering: Specify bracket number, figure number, name and finish. Orders for special brackets are to be accompanied by detailed sketch.
Order Separately: Rod, Fig. 60, bolts, nuts, and back plates for fastening brackets to wall. Specify size and length of rod, bolts size, thickness, and drilling of back plates.
We have Revit content for Hangers. Please select a specific size Hanger to get the corresponding detailed Revit assembly file. The RFA can be downloaded by scrolling to the Downloads panel and clicking the second link at this item level.
The Revit assembly file cannot be downloaded using the MultiCAD functionality.
Installation: When bolted to a wall, an additional back plate may be required of such thickness and size as to properly distribute the weight over the wall. Size and thickness of the back plate is governed by the load to be carried and the nature and conditions of the wall. Back plates furnished upon request.
Features: If supporting pipe by rod, rod can be installed anywhere along the length of the bracket thus providing horizontal adjustment.
Ordering: Specify bracket number, figure number, name and finish. Orders for special brackets are to be accompanied by detailed sketch.
Order Separately: Rod, Fig. 60, bolts, nuts, and back plates for fastening brackets to wall. Specify size and length of rod, bolts size, thickness, and drilling of back plates.
We have Revit content for Hangers. Please select a specific size Hanger to get the corresponding detailed Revit assembly file. The RFA can be downloaded by scrolling to the Downloads panel and clicking the second link at this item level.
The Revit assembly file cannot be downloaded using the MultiCAD functionality.
지역 가용성
| 북미 |
|---|
과들루프 |
과테말라 |
그레나다 |
그린란드 |
네덜란드령 카리브 해 지역 |
니카라과 |
도미니카 |
도미니카 공화국 |
마르티니크 |
멕시코 |
몬세라트 |
미국 |
미국령 버진아일랜드 |
바베이도스 |
바하마 |
버뮤다 |
벨리즈 |
생마르탱 |
생바르텔레미 |
생피에르앤드미클롱 |
세인트루시아 |
세인트빈센트그레나딘 |
세인트키츠네비스 |
신트마르턴 |
아루바 |
아이티 |
앤티가 바부다 |
앵귈라 |
엘살바도르 |
영국령 버진아일랜드 |
온두라스 |
자메이카 |
캐나다 |
케이맨 군도 |
코스타리카 |
쿠바 |
퀴라소 |
터크스케이커스 제도 |
트리니다드토바고 |
파나마 |
푸에르토리코 |
비슷한 제품
4.1 한국의
