제품 게시
R 21 CE - Self-smoothing epoxy floor topping (0.5 – 1.0mm)
ARDEX ENDURA

R 21 CE - Self-smoothing epoxy floor topping (0.5 – 1.0mm)

R 21 CE is a high gloss, self-smoothing, epoxy resin floor finish applied between 0.5 – 1.0 mm thickness. It combines outstanding wearing properties with chemical resistance and decorative finish. Ideally suited in situations where a seamless, joint free finish is required and maximum cleanliness is essential.

COLOURS
Available in any standard RAL colour

FEATURES
• Seamless: easily cleanable to maintain high standards of hygiene
• Tough & Hard wearing: durable with low maintenance cost
• Resistant to a wide range of chemicals and liquids
• Self-smoothing: provides a flat high gloss finish
• Suitable for use as topping on existing epoxy screed
• Food grade: CFTRI approved; confirms to the specifications as per U.S FDA 175.300
• Supplied in pre-measured packs for 0.5 mm and 1 mm thickness requirements

Ardex Endura


사양
  • Pot life: 30 minutes
    Initial hardness: 24 hours
    Full cure: 7 days
    Bond strength: > 1.5 N/Sqmm
    Compressive strength BS 6319 (P2): > 50 N/Sqmm
    Flexural strength BS 6319 (P3): > 25 N/Sqmm
    Tensile strength BS 6319 (P2): > 20 N/Sqmm
    Shore D Hardness: > 70
    Mixed Density: 1.53 g/cc (0.5 mm thickness), 1.57 g/cc (1 mm thickness)
    Coverage: 
    Thickness                     0.5 mm           1.0 mm 
    Coverage (approx.)     19.0 m²            10.5 m²
    Pack Size: 14.50 kg & 16.50 kg

    Ardex Endura

기술 사양
  • 특징 참조r-21-ce
  • 제품군Flooring Solutions
  • 제품분류EPOXY COATINGS & SELF LEVELLERS
  • 유형개체 (단일 개체)
  • 게시일2019-08-24
  • 에디션 넘버2
관련성
  • 주 재료에폭시
  • 설계국가인도
  • 제조국가인도
분류
  • BIMobject 카테고리바닥재 - Coatings & Coverings
  • Uniclass 2015 코드Pr_35_31_68_27
  • Uniclass 2015 설명Epoxy resin coatings
  • CSI 마스터 형식 2014 코드09 96 56
  • CSI 마스터 형식 2014 제목Epoxy Coatings
  • OmniClass 번호23-15 17 29 11
  • OmniClass 제목Industrial Floor Coatings
  • CSI 단일 형식 II 코드C3020
  • CSI 단일 형식 II 제목Floor Finishes

지역 가용성

아시아
인도