| Connections | Grooved (3" - 12") |
| Wall Power | NEMA 5-15R 120 VAC (Non-GFI)* |
| Transformer | NEMA 5-15P
IN: 120VAC
OUT: 24VAC (10ft cable length) |
| Non-Continuous Max Power Draw | 2.0 amp @120VAC** |
| Continuous Idle Power Draw | 0.1 amp |
| Optional Pressure Sensor | Contact Sales |
| Valve Position Confirmation | Yes |
| Communication | RF: 433 MHz valve to WCP/CCM***
Wired: RS-485 (TIA/EIA-485) |
| Cable Specification | Belden 2413F (Plenum), 2412F (Riser), 2149A (Outdoor), OSP6F
(Underground) or equivalent |
| Max Water Pressure | 300PSI |
| Temperature Range | -4° to 212°F |
| Actuator Torque | 425 to 5532 in-lbs
48 to 625 NM (size dependent) |
| Overload Torque Protection | Yes |
| Auto/Manual Modes | Yes, no tools required |
| Butterfly Valve | Lead-free, full-port |
| Open/Close Cycle Time | 27-37s (depending on size) |
| Actuator Enclosure | Self extinguishing techno-polymer
RF transmissive (NEMA 4x) |
| Anti-Condensation Heater | Yes |
| Orientation (specify H or V) | No restrictions, vertical/horizontal 360° |
| Input Auto Reset PCB Fuse | Yes |
| Certifications | UL 1951, CSA C22.2 No. 14, 18, NSF 61 & 372 |
| Flow Sensitivity | Contact Sales (Size Dependent) |
| Required Bolts for Install | SAE J-429 Grade 5 or Higher Flange Bolts |
4.2 (12)
