Pull-Through System (negative pressure or vacuum)
- Pull-through system — the products of combustion are pulled through the combustion chamber for increased radiant efficiency and greater safety
- CSA certified for vertical or horizontal venting
- CSA certified for maximum 75 ft. horizontal sidewall venting
- 4″ O.D. flue connection
- Draft inducer is equipped with permanently lubricated, totally enclosed, fan cooled and heavy duty ball bearing motor for maintenance free operation
- Draft inducer assembly can be used for through- the-roof-venting or rotated 45 degrees or 90 degrees for horizontal venting
Burner System
- One piece cast iron burner
- 10 year limited warranty on burner
- Inside or optional outside air for combustion
- CSA certified for 50 ft. outside combustion air inlet duct
- 4″ O.D. standard combustion fresh air inlet duct opening
- Burner inspection sight glass
- State-of-the-art step opening combination gas valve for quiet ignition
- Diaphragm Air Proving Switch — a safety device for proof of venting before gas flow and ignition
- Spark ignition system with 100% Gas Shut-Off Safety Control (30 second pre-purge)
- 36″ Stainless Steel flexible gas connector included with control box
Radiant Emitter Tube System
- All radiant emitter tubes are 3″ O.D
- Aluminized steel emitter tubes are calorized for long life and high radiant efficiency — will not flake or peel, and are corrosion resistant
- The Calorization produces an emitter tube which is highly radiant absorptive on the interior and highly radiant emissive on the exterior
- 5 year limited warranty on the emitter tubes
Reflector System
- Fully factory pre-assembled on tube body to minimize field assembly and save installation labor cost
- Highly efficient aluminum reflectors with reflectivity rating of 97%
- Reflector ends are enclosed for maximum radiant heat output and minimum convection loss
- Easy to use mounting brackets
- Suitable for horizontal or angle mount up to 45 degrees
Other
- 3 Monitoring light system for on line diagnosis- power on, insufficient air flow, and ignition system operation
- Uncomplicated maintenance access
- Quick slip-on electrical connectors
- 1/2″ MPT gas inlet connection
- CSA approved for indirect vented operation- commercial installations only
- Optional deflector kit for reduced clearances to combustible materials
- Optional decorative grille kit for drop ceiling applications
- Optional side reflector kits
- CSA Certified according to ANSI Z83.20 and CSA 2.34. Certified for Residential and Commercial Use
Keywords: outdoor heater, commercial heater, infrared heater, space heater, restaurant heater, hospitality heater, patio heater, patio heaters, garage heater, industrial heater, outdoor infrared heater
4.6 
