BOLLARD
TONIGHT 200 h800mm 360°
S.2111W
module LED 3000K 220-240Vac ON-OFF
Rated module luminous flux:: 4652lm
Rated luminaire luminous flux: : 649lm
Rated module power: : 23.9W
Rated luminaire power: : 27.4W
Luminaire efficacy: : 24lm/W
Voltage (AC): : 220-240Vac
Frequency (AC): : 50/60Hz
Voltage (DC): : 176-276Vdc
Dimmable: : NOT DIMMABLE (ON-OFF)
(DALI; DALI 2 available with surcharge)
Electrical insulation class: : II
Protection class IP: : IP65
Mechanical resistance: : IK09
CE ENEC
SPECIAL VERSION ON REQUEST: this Luminaires can be supplied with a surcharge in class III (without power supply). Requires working remote power supply in costant current at 700mA Vfmin=21.2Vdc Vfmax=37.2Vdc.
Example SIMES compatible power supplies (check the complete list of the drivers on the catalogue):
Art. S.2410 POWER SUPPLY DALI2 230V/350-1050mA 57,8W IP67
Art. S.3423 POWER SUPPLY MULTI-POWER 230V/350mA-1050mA IP20
NB: Use 1 Power Supply for each Luminaires
LUMINAIRE TYPE
Bollard fitting. IP rating IP 65
MATERIAL CHARACTERISTICS
Extruded EN AW-6060 aluminium profile, die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process
1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09
LIGHTING PERFORMANCE
Micro etched prismatic glass diffuser, with controlled downward light emission for avoiding any glare. Lamp fixed position . LOR --
INSTALLATION AND MAINTENANCE
Garden mounted fixtures are to be installed and used with the ground stake accessory or cemented root flange. These cannot be installed directly to the ground or cement bases without the relative accessories because the contact between the two different materials may lead to an accelerated process of oxidation of the fixture. The wiring of the fixtures must strictly respect the specifications. Where not provided by the fixture loop in /out or through wiring will cause infiltration of humidity and if in contact with the cables this may lead to an accelerated process of oxidation.
WIRING
Luminaire hard wired with single neoprene cable with cable gland . Silicone gaskets. Isolation: CLASS II . Available colours: Anthracite grey (cod.24). Weight: 10.4651 Kg Glow Wire test: --
LED module included
TONIGHT REGISTERED DESIGN
TONIGHT PATENTED
This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.This product contains a light source of energy efficiency class (EPREL - European Product Registry for Energy Labelling): E.
LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.
ELECTRONIC EQUIPMENT SENSITIVE TO OVERVOLTAGE.We recommend installing surge protection devices "SPD" in the electrical system. Protection devices prevent the intensity of these phenomena’s, protecting the appliances from the risk of being damaged and extending the lifespan. Outdoor luminaires are subject to all types of permanent, temporary, or transient electrical disturbances. Such disturbances can create permanent damage or failure affecting its performance and durability. The surge protection device (supplied by SIMES) is utilized to limit the destructive effect of these phenomena. We suggest that each luminaire must be connected to one protection device at not more than 10m away. For correct coordination of the protections, a surge protection device must also be provided inside the electrical panel of the system (the selection of this device must be carried out from the electrical designer and is not supplied by SIMES).