URBAN LIGHTING
TOMORROW 250mm POLE TOP 60mm (76mm on request)
S.2136W
module LED 3000K 220-240Vac DIMMABLE DALI; DALI 2
Rated module luminous flux:: 8142lm
Rated luminaire luminous flux: : 3747lm
Rated module power: : 41.9W
Rated luminaire power: : 51.8W
Luminaire efficacy: : 72lm/W
Voltage (AC): : 220-240Vac
Frequency (AC): : 50/60Hz
Voltage (DC): : 176-280Vdc
Dimmable: : DALI; DALI 2
Electrical insulation class: : II
Protection class IP: : IP65
Mechanical resistance: : IK06
CE ENEC
SPECIAL VERSION ON REQUEST: this Luminaires can be supplied with a surcharge in class III (without power supply). Requires working remote power supply in costant current at 1050mA Vfmin=36.4Vdc Vfmax=43.4Vdc.
Example SIMES compatible power supplies (check the complete list of the drivers on the catalogue):
Art. S.2410 POWER SUPPLY DALI2 230V/350-1050mA 57,8W IP67
Art. S.3427 POWER SUPPLY Dali, 1-10V, PUSH MULTI-POWER 230V/350mA-1050mA IP20
NB: Use 1 Power Supply for each Luminaires
LUMINAIRE TYPE
Post top luminaire. IP rating IP 65
MATERIAL CHARACTERISTICS
Aluminium die cast housing in EN AB-47100 (low copper content) and extruded EN AW-6060 with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process
1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 06
CONTROL AND LIGHT MANAGEMENT
Tomorrow Ø 250mm is supplied standard with dimmable power supply DALI. The VIRTUAL MIDNIGHT mode is available on request with surcharge or with signal converter from DALI to VIRTUAL MIDNIGHT S.2492 (IP20) or S.2493 (IP67) for up to 7 DALI luminaires. Possibility to extend up to max. 64 luminaires through the VIRTUAL MIDNIGHT S.2492 (IP20) + DALI EXPANDER S.2494 (IP20) or S.2497 (IP67) which provides both.
LIGHTING PERFORMANCE
The light distribution is in accordance with light pollution regulations. Toughened glass. LOR --
POLE CONNECTION
Pole head in painted aluminium with Ø 60 mm connection or Ø 76 mm connection (on request).
WIRING
Supply 0.5m cable section type H05RN-F . Single cable entry sealed with B component epoxy resin, wired internally protected by silicon sheaths. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Black (cod.09), Anthracite grey (cod.24). Weight: 5.9297 Kg Glow Wire test: --
LED module included
TOMORROW REGISTERED DESIGN
This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.This product contains a light source of energy efficiency class (EPREL - European Product Registry for Energy Labelling): E.
LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.
ELECTRONIC EQUIPMENT SENSITIVE TO OVERVOLTAGE.We recommend installing surge protection devices "SPD" in the electrical system. Protection devices prevent the intensity of these phenomena’s, protecting the appliances from the risk of being damaged and extending the lifespan. Outdoor luminaires are subject to all types of permanent, temporary, or transient electrical disturbances. Such disturbances can create permanent damage or failure affecting its performance and durability. The surge protection device (supplied by SIMES) is utilized to limit the destructive effect of these phenomena. We suggest that each luminaire must be connected to one protection device at not more than 10m away. For correct coordination of the protections, a surge protection device must also be provided inside the electrical panel of the system (the selection of this device must be carried out from the electrical designer and is not supplied by SIMES).