Along with the standard SRC360 Mobile Railing offering there are an almost unlimited specialty application scenarios encountered on a commercial roof. To accommodate these special circumstances, Safety Rail Company builds a wide variety of specialty railings and custom fabrications to ensure that fall protection standards are being met and the client achieves their fall protection goals without the need for seeking out multiple suppliers. We strive to be that one-stop-shop supplier for our clients thereby ensure that all components work seamlessly together. Here is a partial list of some common specialty applications shown on the products page.
Parapet Wall Railing:
Many buildings will have a short parapet wall around them with a roof hatch or mechanical equipment mounted right next to the wall. Our parapet wall railing is a "U" shaped railing that wraps over the top of the parapet and around the unit being guarded. This "U" shape railing allows the worker to access the unit without have railing in the way of their work.
Camera or Light Protection:
Many buildings will have a camera or antenna or exterior light on the corner of a building. Our parapet corner wall railing is "V" shaped railing that wraps over the top of the parapet and around or up to the unit being guarded. This "V" shape railing allows the worker to access the unit without have railing in the way of their work.
Finish Railings:
Many buildings will have a fixed ladder coming up the side of a building. Our finish railings feature a 12" overhang on one end of the railing leg. This loop shape to the railing allows a worker a handhold to the railing but the base plate is inset from the loop so it does not present a tripping hazard. These railings can also be used to close off any gaps in the railing run that might exist on corners where no gap is preferred.
Toeboards for Railings:
95% off rooftop railing installations do not require toeboards. They are only required if there is imminent danger of kicking something off the roof onto someone below. Our toeboards sit on top of our base plate and the railings are inserted through receiver holes in the toeboard and base thus locking the toeboard onto the base. Toeboards are available in powder coat yellow or galvanized finish and are fit to each size of railing.
Adjustable Height Adaptor for Railings:
Some roofs will have different roof levels that vary from an inch to several inched higher or lower than adjoining roof. The Adjustable Height Adaptor inserts inside one of the leg of a railing to lift it higher in the base plate to match next higher roof level. This allows a continuous line of railings from one level to the next without creating individual railing runs on each level. Height variations of 11" can be accommodated with the adaptor insert.
4.9 (15)
