製品の公開
BS_Windows
BS_Windows
    Product sites

    BS_Windows

    Google翻訳”,

    時々、注目を集めるための最良の方法は邪魔にならないようにすることです。 JELD-WEN V-2500固定画像ウィンドウは、滑らかで滑らかなラインと長持ちするように設計された構造でそれを実現します。この開かない窓はどんな装飾とも美しく調和し、光源と視覚的な目玉の両方を提供します。エネルギー効率の高いガラスを使用した固定画像ウィンドウを選択すると、寒い時期には内側の熱を保ち、暑い時期には外側の熱を保ち、より大きな節約と快適さを提供します。これは見逃したくない1つのウィンドウです。

    • Energy Star認定製品は、加熱および冷却コストを削減します
    • 業界をリードする限定生涯保証
    • 偶発的なガラス破損の範囲
    • 長期間使用するためのメンテナンスが少なく耐久性のあるビニール
    • 新規建設または交換用窓プロジェクトに最適
    • より多くの光を必要とするあなたの家のスペースに最適
    • 栗色のブロンズとダークチョコレートのエクステリアカラーは、ホワイトのインテリアウィンドウカラーでのみご利用いただけます
    仕様
    • PART 1  - GENERAL

      1.1       SECTION INCLUDES

      A.          Vinyl Windows and Patio Doors: [Awning Windows] [Casement Windows] [Fixed, Radius and Geometric Windows] [Horizontal Rolling Windows] [Single-Hung Tilt Windows] [Sliding Patio Doors] [Out-swinging Patio Doors].

      1.2       REFERENCES

      A.          American Architectural Manufacturer Association (AAMA) (for use in non-HVHZ areas)

      1.          AAMA/WDMA/CSA 101/I.S.2 /A440 - North American Fenestration Standard/Specification for windows, doors, and skylights (NAFS). 

      B.          National Fenestration Rating Council (NFRC):

      1.          NFRC 100; Procedure for Determining Fenestration Thermal Properties.

      2.          NFRC 200; - Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence..

      C.          Florida Building Code Test Procedures (Miami-Dade TAS) (Non-Impact HVHZ):

      1.          TAS 202; Criteria for testing Impact and Non-Impact Resistant Building Envelope Components using Uniform Static Air Pressure.

      D.          ASTM International.

      1.          ASTM E90 – Laboratory measurement of Airborne Sound Transmission of Building Partitions and Elements.

      2.          ASTM E1332 – Standard Classification for Rating Outdoor – Indoor Sound Attenuation.

      1.3       SUBMITTALS

      A.          Submit under provisions of Section 0 13 00 – Administrative Requirements.

      B.          Product Data: Manufacturer's data sheets on each product to be used, including:

      1.          Preparation instructions and recommendations.

      2.          Storage and handling requirements and recommendations.

      3.          Installation methods.

      C.          Shop Drawings: Submit shop drawings indicating details of construction, flashings and relationship with adjacent construction.

      D.          Selection Samples: For each factory-finished product specified, two complete sets of color chips representing manufacturer's full range of available finishes.

      E.          Verification Samples: For each factory-finished product specified, two samples, minimum size 6 inches (150 mm) square, representing actual finishes.

      F.          Design Data, Test Reports: Provide manufacturer test reports indicating product compliance with indicated requirements.

      G.         Closeout Submittals: Refer to Section 0 17 00 Execution and Closeout Requirements Closeout Submittals.

      1.4       QUALITY ASSURANCE

      A.          Installer Qualifications: Minimum __ year(s) installing similar assemblies.

      B.          Certifications: AAMA certification label indicating assemblies meet the design requirements.

      C.          Mock-Up: Provide a mock-up for evaluation of installation techniques and workmanship.

      1.          Mock-ups shall incorporate surrounding construction, including wall assembly fasteners, flashing, and other related accessories installed in accordance with manufacturer's approved installation methods.

      2.          Do not proceed with remaining work until workmanship is approved by Architect.

      3.          Modify mock-up as required to produce acceptable work.

      4.          At Substantial Completion, approved mockups may become part of completed work.

      5.          Demolish mockups and remove from site.

      1.5       Pre-installation Meeting: Conduct pre-installation meeting on-site two weeks prior to commencement of installation.

      1.6       DELIVERY, STORAGE, AND HANDLING

      A.          Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations and industry standards.

      B.          Deliver and store assembly materials and components in manufacturer's original, unopened, undamaged containers with identification labels intact. Protect from damage.

      1.7       PROJECT CONDITIONS

      A.          Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by Manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

      1.8       WARRANTY

      A.          Manufacturer's Standard Warranty: Assemblies will be free from defects in materials and workmanship from the date of manufacture for the time periods indicated below:

      1.          Window Unit: [Owner Occupied Single-Family Residence: Lifetime] [Commercial: 10 years].

      2.          Patio Door Unit: [Owner Occupied Single-Family Residence: Lifetime] [Commercial: 10 years].

      3.          Glazing:

      a.          Insulated Glass: [Owner Occupied Single-Family Residence: Lifetime] [Commercial: 10 years] against seal breakage.

      b.          Laminated Glass: 5 years against delamination.

      c.           Specialty Glazing: 5 years against delamination.

      PART 2  - PRODUCTS

      2.1       MANUFACTURERS

      A.          Acceptable Manufacturer: JELD-WEN, Inc.; 440 South Church Street, Suite 400, Charlotte, NC 28202; Toll Free Tel: 800-535-3936; Tel: 541-850-2606;Fax: 541-851-4333; Email: architectural_inquiries@jeld-wen.com; Web: http://www.jeld-wen.com.

      B.          Substitutions: Not permitted.

      C.          Requests for substitutions will be considered in accordance with provisions of Section 0 16 00 – Product Requirements.



    技術仕様
    • Unique refbs_window
    • コレクションセットWindows
    • コレクションFixed Windows
    • タイプオブジェクト(1つのオブジェクト)
    • 公開日2012-02-17
    • エディション1
    • 高さ(Mm)1300
    • 幅(mm)1200
    関連
    • 設計国スウェーデン
    • 製造国スウェーデン
    識別情報
    • BIMobjectカテゴリ窓 - FIX窓(はめ殺し)
    • IFC分類
    • UNSPSC名称Windows
    • UNSPSC301716
    • Uniclass2015コードEF_25_30
    • Uniclass2015詳細Doors and windows
    • MasterFormat 2014 コード06 46 13
    • MasterFormat 2014 タイトルWood Door and Window Casings
    • OmniClassNumber23-17 13 00
    • OmniClassタイトルWindows
    • UniFormatIIコードB2020
    • UniFormatIIタイトルExterior Windows