FiberTite® 36 Mil Fleece back Membrane

Description

36 mil FiberTite-FB “fleece back” is a 30-oz sq. yd/nominal

36-mil (0.9 mm) thick membrane. In addition to exceeding the

ASTM D 6754-15 Standard Specification for Ketone Ethylene

Based Sheet Roofing’s minimum standards, 36 mil FiberTiteFB meets or exceeds the physical properties and performance

characteristics of most competitive 50-mil membranes.

The 36 mil FiberTite-FB membrane incorporates a 4-oz per sq.

yd non-woven polyester felt, heat bonded to the back side of

the membrane with a 3-in selvedge edge for field welding. 36

mil FiberTite-FB is manufactured in conventional 72-in by 80-ft

roll goods.

Seaman Corporation is vertically integrated, which allows

complete control over the manufacturing process from the

selection of the yarns, to the engineering, knitting and weaving

of the base fabrics to the final coating process. Today, FiberTite

Roofing Membranes are the result of Seaman Corporation’s 60

years of applied fabric engineering and coating technology.

All FiberTite Roofing Membranes are constructed using

high tenacity/heavy weight yarns to create a base fabric

reinforcement to impart superior puncture, tensile and tear

resistance properties. The base polyester fabrics are primed with

a unique and proprietary adhesive coat that lays the foundation

to physically bond the KEE coatings to the “fiber” to maximize

seam strength and overall membrane performance.

36 mil FiberTite-FB is coated face and back with Seaman

Corporation’s original “KEE” formulation to provide superior

hot air welding characteristics, extreme UV resistance, broad

chemical resistance and long-term flexibility and reparability

for the installed roofing membrane system. Additionally, 36 mil

FiberTite-FB exhibits superior tear, puncture, fungus, algae and

flame resistance that make FiberTite Roofing Systems some of

the most sustainable roofing systems available.

Application

36 mil FiberTite-FB Roofing Systems are installed by adhering
the “fleece back” membrane in FTR-290 low VOC solvent borne
adhesive, FTR-390 water borne asphalt emulsion, FTR-490
water borne elastomeric adhesive, FTR CR-20, or hot asphalt to
a variety of pre-approved substrates.
For specific installation recommendations and requirements,
please consult the most current versions of Seaman Corporation’s
Guide Specifications for the Installation of FiberTite Roofing
Systems.