CHV-TSTAT-FCU - Heating/Cooling Fan-Coil Thermostat

Measurement Range
 
Indoor Temperature: 0° to 110°F (-18° to 43°C)
Outdoor Temperature: -40° to 170°F (-40° to 77°C)[1]
Humidity: 0% to 100% RH[1]

Temperature Tolerance
Over Full Range: ±1°F (±0.5°C)
At Room Temperatures: ±1°F (+0.1/-0.4°C)

Setpoint Range
Auto Setpoint: 38° to 99°F (3° to 37°C)
Heat only Setpoint: 38° to 89°F (3° to 32°C)
Cool only Setpoint: 59° to 99°F (15° to 37°C), or 38° to 99°F (3° to 37°C) extended cool mode enabled
Humidity Setpoint:5% to 70% RH[1]

Relay Rating
1 Amp at 40 Volts DC or 24 Volts AC (nominal)

Power Requirements
24V: 2 Watts (0.083 Amps) at 24 Volts AC, supplied by heating or cooling system
Cresnet® Power Usage: ‹1 Watts (‹0.05 Amps at 24 Volts DC), required for Cresnet communication only

Buttons
MODE: Accesses user controls - system mode, fan mode, humidifier,[1] Crestron® system, and global update
VIEW: Accesses humidity reading,[1] outdoor temperature reading,[1] system messages, and remote functions
UP: Selects user modes and increments selection in setup modes
DOWN: Selects user modes and decrements selection in setup modes

Display
Type: Transflective LCD, backlit
Size: 2.75 in (6.99 cm)
Resolution: 128 x 64
Viewing Angle: ±50° horizontal (at 0° vertical), ±50° vertical (at 0° horizontal)
Displays current indoor temperature and relative humidity,[1] outdoor temperature and relative humidity,[1] setpoints, activity, function, Cresnet system information, internal relay status, setup menus, and control system messages

Connections
HVAC:
(2) 9-position terminal blocks comprising the following:

Power Connections (Required):
24 (C): 24V AC common terminal supplies remote 24V AC power to thermostat;
24 (R): 24V AC reference terminal – Can be connected to R by P4 jumper setting, or tied directly to power source

HVAC Control Connections (System Dependent):
HUM, RHU: Humidity Control – Energized together during humidity call;
R, R: Reference – Used for all system calls (except humidity);
G-L: Fan Low – Energized to R during call for low-speed fan;
G-M: Fan – Energized to R during call for medium-speed fan;
G-H: Fan – Energized to R during call for high-speed fan;
O: Changeover control – Energized to R during cooling modes;
B: Energized to R during non-cooling modes;
W: Heat – Energized to R during call for heating;
Y: Cool – Energized to R during call for cooling

Remote Sensing Connections (Optional):
RSR: Remote Sensor Returns – Common sensor terminal;
RS1: Remote Sensor terminal – Connect the sensor from RS1 to RSR;
RS2: Remote Sensor terminal – Connect the sensor from RS2 to RSR
 
Network
(1) 4-position terminal block;
Cresnet slave port, connects to Cresnet control network

Enclosure
Plastic, surface-mountable to the front of a horizontally oriented 1-gang electrical box

Dimensions
Height: 3.75 in (96 mm)
Width: 5.00 in (127 mm)
Depth: 1.04 in (27 mm)
Weight: 5.80 oz (165 g)

Notes:
1. Humidity sensing and outdoor temperature/humidity sensing require additional remote sensors, sold separately. See “Available Accessories” for model names.