Standard: LPS 1175 B3 (SR2) Issue 8, BS1722-14: 2017, BS EN ISO 1461:2009, BS EN 13438:2013
Secured by Design - Police Preferred Specification
Product Reference: CLD ModSec Securus S2 358 Rigid Mesh Panel System
Panel type: Mesh and wire. Double layered mesh cassette system. High aluminium content galvanised and powder coated to minimum 80 microns dft.
(Note: Fence Cassettes are supplied assembled for ease of install, mechanical lifting required – can be supplied unassembled)
Panel width: 2520mm
Wire diameter: 4mm
Mesh size: 76.2 x 12.5mm
Height:
Select as required. 2440mm to 5000mm
Nominal height: 2.4m to 5.0m
Finish: Polyester powder-coated to minimum 80 microns.
Any RAL colour including marine grade and metallics.
Top edge projection: nil
Security topping
options: Barbed and razor wire, cranked and straight
Posts: Special flanged post, galvanised after manufacture and polyester powder-coated to match fencing
Post dimensions: 80mm x 60mm
Maximum post
Centres: 2533mm +/-15mm
Fixings: 120mm x 6mm full length clamp bar. M8 Stainless Steel cup square bolt (min 30mm)
Foundations: Install Modsec foundation on suitable flat ground making sure blocks interlock and posts are installed in every fourth block. Set post into block with suitable compound depending on permanent or temporary installation.
Warranty: Minimum of 15 years against manufacturing defects.
Notes: All dimensions are nominal, for further information please contact CLD Fencing Systems.
Information is correct at time of production. As part of our policy of continuous improvement, we reserve the right to alter product specification without notice.
To be read in conjunction with Preliminaries/General conditions
3.7 
