Standard: LPS 1175 A1 (SR1) Issue 8, BS1722-14: 2017, BS EN ISO 1461:2009, BS EN 13438:2013, Secured by Design - Police Preferred Specification
Product Reference: CLD Dulok S1 Double Wire Rigid Mesh Panel System
Panel type: Mesh and wire. Single vertical and double horizontal wires. Galvanised and powder-coated to minimum 60 microns
Panel width: 2508mm
Wire diameter: 6mm verticals and 8mm horizontals.
Mesh size: 200m x 50mm
Height:
Select as appropriate 1830mm up to 5070
Nominal height: 1.8m to 5m
Finish: Polyester powder-coated to minimum 60 microns.
Any RAL colour including marine grade and metallics.
Top edge projection: 30mm
Panel installation: Bottom of panel maximum 50mm above ground
Security topping
options: Options available on request
Posts: RHS, galvanised after manufacture and polyester powder-coated to match fencing
Post dimensions: 60mm x 40mm to 120mm x 60mm depending on height of panel
Maximum post
Centres: 2518mm
Fixings: 40mm x 5mm full length clamp bar. M8 x 40mm stainless steel pin hex dome-head security screws. Sheardrive™ if required instead of pin hex.
Foundations: Set posts in holes minimum of 300mm square or 400mm diameter x 800mm deep. Note: Contractor/ client is responsible for the foundation size suitable for the ground conditions and height of fence.
Warranty: Minimum of 15 years against manufacturing defects
Notes: All dimensions are nominal, for further information please contact CLD Fencing Systems.
Information is correct at time of production. As part of our policy of continuous improvement, we reserve the right to alter product specification without notice.
To be read in conjunction with Preliminaries/General conditions
3.7 
