Fire-Rated Insulated Stainless Steel Access Panel (BA-FRI-SS)

BA-FRI-SS Specifications:

• Material: 16-gauge cold rolled frame and 20-gauge galvanneal steel door
  
• Hinge: Continuous piano hinge
• Locking Mechanism: Self-latching tool-key operated slam and ring-operated slam latch; both included
• Flange: 1” exposed flanges of cold rolled steel
• Frame: 2-½" in depth made of cold rolled steel
• Rough Opening: Door sizes + ¼" + 6 mm
• Finish: Polished #304 stainless steel (Note: Masonry anchors included)
• Packaging: Individually wrapped, 1 door per box

Fire rated access doors, for vertical use, are subject to the following:

Vertical wall assemblies

Fire rated access doors, for vertical use, are subject to the following:

Certification

UL 10B (2009), NFPA 252 (2012), CAN/ULC S104 (R1985), CAN/ULC S104 (2010).

Rating Achieved

3 hours, neutral/negative pressure

Maximum size

48" x 48" (1219mm x 1219mm), maximum area of 2304 in², tolerance on height and width limitation is 3" (76mm) if the area does not exceed 2304 in².

Temperature rise

250°F (121°C) after 30 minutes and 450°F (232°C) after 60 minutes.

Fire rated access doors, for horizontal use, are subject to the following:

Horizontal ceiling assemblies

Fire rated access doors, for horizontal use, are subject to the following:

Certification

ASTM E119 (2012), CAN/ULC S101 (2007)

Rating Achieved

3 hours in non-combustible construction and 1 hour in combustible construction

Maximum size

24"X36" (610 mm X 914 mm) (hinges and latches on the side of 36"), tolerance on dimension limitations is 3" (76 mm) if the area does not exceed 864 in².

Temperature rise

Within allowable per ASTM E119 and CAN/ULC S101