ALUTECH Group of Companiesフォロー

Dock leveller swing lip

仕様

仕様

• Specification
  Length of the dock leveller:	2000 mm 2500 mm 3000 mm 3500 mm 4000 mm 4500 mm
  Width of the dock leveller:	1750 mm 2000 mm 2500 mm
  Height of the dock leveller:	600 mm 700 mm 800 mm 900 mm
  Load capacity:	60 кН
  Steel sheet thickness of the hinged part:	6/8 mm
  Steel sheet thickness of the lip:	12/14 mm
  Lip length:	400 mm
  Operating temperature range:	-40 … +50
  Models of dock leveller:	It is chosen depending on the stage of construction works and characteristics of a particular location. S - frameless model for mounting in preliminary prepared pit after finishing W - frame model for mounting in preliminary prepared pit after finishing C - frame model for mounting in preliminary prepared pit before laying of the final floor B - model with a frame that allows pouring of the concrete at the stage of ramp construction
  Protective coating:	The metal parts of the leveller are treated by bead blasting and coated with 2-component enamel Coating thickness: 100 microns
  Standard colours:	RAL 9017 (black); RAL 7016 (anthracite grey*); RAL 5002 (blue).
  Design of dock leveller:	Frame, hinged part, swing lip, support beam, reinforcing plates, reinforcing rod, hydraulic unit, two lifting hydraulic cylinders, hydraulic lip cylinder, control unit
  Frame:	Made of steel and is designed for mounting the dock leveller to the pit
  Hinged part:	Made of hot-rolled steel sheets
  Supporting beam:	Designed for mounting of the main lifting cylinders. Support beam is a roll-formed channel 140 × 60 × 5 mm
  Reinforcing plates:	Make the hinged part of the dock leveller more durable and have the ability to twist at least 3 % (≈ 1.7 degrees) in the cross direction. This allows to level the lateral pitch that occurs when the vehicle tilts to the side. The number of reinforcing plates: 8 PCs. Size of plates: 132×35×3 mm
  Reinforcing rod:	Connects the supporting beam and rear part of leveller. It is an additional security element
  Hydraulic unit:	Provides hydraulic oil flow to the cylinders, which operate the main part lifting and the lip movement. The tank capacity of the hydraulic unit is 7 l. The length of electric cables used for the hydraulic unit is 7 or 10 m (depending on the length of the dock leveller)
  Lifting cylinders:	Two hydraulic lifting cylinders are included in standart kit. Lifting cylinders drive the hinged part of the dock leveller. The plungers of the cylinders have a corrosion resistant coating. The external diameter of cylinders is 60 mm.
  Hydraulic lip cylinder	Provides the lip movement. The plunger of cylinder has a corrosion resistant coating. The external diameter of the lip cylinder is 50 mm
  Control unit (CUL 01):	The standard leveller kit includes the control unit. Supply voltage: 3~230/400 V Utility frequency: 50 Hz Electric motor power: <1,2 kW Working power in standby mode: <5 W Nominal source voltage of valve: 24 V direct current Section of wires connected to the socket, mm2: max. 2.5 Enclosure protection: IP54 (professional installation) Operating temperature range, ° C: −25…+40 Power cord length / section of wire: not less than 1 m / 1.5 mm2
  Safety systems:	1. Protection from misalignment - two lifting cylinders 2. Automatic locking of hydraulics in case of accidental rollback of the transport while unloading 3. Automatic locking of hydraulics when there is a power failure 4. Protection of the support beam against breakage - reinforcing rod 5. Protection of feet from becoming trapped - protective shutters 6. Protection of hinged part against breakage - reinforcing plates 7. Protection against sliding of the loader wheels on the dock leveller surface - lentil corrugation of hinged part and lip 8. Supporting beam for the service maintenance and repair

技術仕様

技術仕様

• Unique refdock-leveller-swing-lip
• コレクションセットDock levellers
• コレクションDock levellers
• タイプオブジェクト（１つのオブジェクト）
• 公開日2022-04-13
• エディション1

リンク

リンク

• 製品のURLhttps://old.alutech-group.com/en/products/loading_equipment/dock_leveller_with_swing_lip/alutech_sl
• インストール手順https://old.alutech-group.com/upload/iblock/ebd/instrukciya-po-montazhu-uravnitel-naya-platforma-sl.pdf
• 説明用動画https://www.youtube.com/watch?v=Ek2KfgmwgQY

関連

関連

• 主なマテリアルスチール
• 設計国ベラルーシ
• 製造国ベラルーシ

識別情報

識別情報

• BIMobjectカテゴリ積み込み設備 - ドックレベラー
• IFC分類タラップ
• UNSPSC名称Lift stations
• UNSPSC47101533
• Uniclass2015コードPr_65_80_23
• Uniclass2015詳細Dock levellers
• MasterFormat 2014 コード11 13 19.13
• MasterFormat 2014 タイトルLoading Dock Levelers
• OmniClassNumber23-23 23 13 15
• OmniClassタイトルHydraulic Dock Levelers
• UniFormatIIコードE10
• UniFormatIIタイトルEQUIPMENT