Model 1000 TESTanDRAIN® - Single Handle Ball Valve

2.1 SPRINKLER SPECIALTY PIPE FITTINGS

A. Flow Detection and Test Assemblies

1. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following
   1. AGF Manufacturing Inc.; Model 1000 TESTanDRAIN
   2. Insert manufacturer's name
2. Standard - UL's Product iQ listing or Approval Guide, published by FM Global, listing.  NFPA 13, 13R, 13D, as applicable.
3. Pressure Rating -  300 psig, 2070 kPa. 
4. Materials - Bronze body, brass stem, impregnated Teflon seat, chrome coated brass ball, and a steel handle with positive stops at the TEST and DRAIN positions 
5. Components -  A tamper resistant test orifice, integral tamper resistant sight glasses, a tapped and plugged port for system access, and a steel identification plate.
6. Test Orifice Size - Nominal 2.8K, 4.2K , 5.6K , 8.0K, 11.2K, 14.0K, K25.2, as required by NFPA 13, latest edition.
7. Size - Same as connected piping. 
8. Inlet and Outlet: Threaded or Grooved. 
9. Options
   1. Bypass drain port in the valve body for use with a pressure relief valve and associated drainage piping.
   2. Locking Plate Kit - Provides vandal resistance and prevents accidental alarm activation by locking the valve handle in the OFF position.
      1. Locking Plate - Carbon steel. 
      2. Lock - 1.5 inch wide solid brass with a 0.375 inch chrome plated hardened steel shackle. 
      3. For use with a 0.75 inch, 1 inch, 1.25 inch, 1.5 inch, 2 inch valve.