Rolling Steel Fire Doors FireStar® Model 700

Our FireStar® Model 700 Rolling Steel Fire Doors provide a practical and innovative solution to safety and fire protection. FireStar® doors can be drop-tested and reset at any time by anyone, thanks to a standard auto-reset feature. This rolling steel fire door features a forward-thinking design that outperforms industry standard fire doors in all areas, including auto-reset testing capability; smooth, quiet operation; and reliable, long-lasting performance.

The revolutionary FireStar® design uses a patent-pending planetary gear on the drop-out mechanism ensuring years of reliable service and drop-out performance. Factory-tested and approved for a minimum of 20,000 cycles, the FireStar® door can be used and tested on a regular basis without concerns of premature failure. Our rolling steel fire doors have been tested and approved to meet the requirements of well-known agencies, such as Underwriters Laboratories and Factory Mutual, and conform to NFPA Standard 80.

We incorporate one standardized component design for all FireStar®* doors regardless of size, and utilize fewer parts than other models. This helps to ensure more accurate installations and reduces the possibility of potential service calls in the future.

*Doors up to 24’x24’

BIM objects are for general reference and should not be used for exact construction information. Please contact a Wayne Dalton Dealer when exact dimensions are required.

Voce di capitolato

Key Product Features
- Max Height: 24’ (7,315.2 mm)
- Max Width: 24’ (7,7315.2 mm)
- Max Square Foot: 324 sq. ft.
- Material: Galvanized or Stainless Steel
- Curtain: Interlocking roll-formed slats with alternate slats fitted with metal endlocks / windlocks
- Operation: Lift-up standard. Chain hoist included on sizes that require it
- Bottom Bar: Two equal angles, 0.121" min thickness, to stiffen curtain
- Brackets: Enclose ends of coil and provide support for counterbalance pipe at each end. Fabricate of steel plates with permanently sealed ball bearing
- Counter Balance: Curtain to be correctly balanced by helical springs, oil tempered torsion type. Cast iron barrel plugs will be used to anchor springs to tension shaft and pipe 20,000 cycle
- Hood: Minimum 24-gauge galvanized or stainless steel hood fabricated of sheet metal, flanged at top for attachment to header and flanged at bottom to provide lonitudinal stiffness
- Finish: Rust inhibitive primer or non-galvanized surfaces and operating mechanisms. Guides and brackets will be coated with a flat black prime paint.
- Operator Options: Chain Hoist with gear drive reduction, wall crank box, motor operation, motor operation with electrical sensing edge, motor operation with pneumatic sensing edge
- Release Mechanism: FireStar release mechanism standard on doors up to 24' x 24'
- Mounting: Structural drive, drywall over wood stud jamb, drywall over 16-gauge steel stud jamb.
*Maximum height and maximum width are independent of each other and may vary based on slat profile, material and gauge.
FireStar Door Control Devices
Chain hoist, motor and crank operation
- Revolutionary fire door control device utilizing a patented planetary gear arrangement to disconnect the operator and drop the door in the event of a fire
- Easy drop test and reset a fire door without resetting spring tension and rerouting cables.
Lift up operation
- Revolutionary fire door control device utilizing a clutch plates and unique counterbalance technology to drop the door in the event of a fire.
Slat Profiles
No. 2 - Standard: Curved-faced single crown slat. Available: Up to 20-gauge steel Up to 20-gauge stainless steel Pitch: 1.9'
No. 4 - Standard: Curved-faced single crown slat. Available: Up to 18-gauge steel Up to 20-gauge stainless steel Pitch: 2.8'
No. 14 - Standard: Flat-faced slat. Available: Up to 18-gauge steel Up to 18-gauge stainless steel Pitch: 2.45'
No. 17 - Standard: Flat-faced slat. Available: Up to 20-gauge steel Up to 20-gauge stainless steel Pitch: 1.6'
Warranty: 2 year limited

Specifiche tecniche

Rif. Unicorolling-steel-fire-doors-firestar-model-700
Famiglia di prodottoCommercial Doors
Gruppo di famigliaRolling Doors
TipoOggetto (oggetto singolo)
Data di pubblicazione2024-04-25
Numero di versione1

Links

Link al Prodottohttps://www.wayne-dalton.com/commercial-fire-doors-700
Istruzioni di installazionehttps://waynedalton-prod-assets.azureedge.net/assets/docs/default-source/install/comm/fire/700-700c-installation-341894.pdf?sfvrsn=117298d3_13
Descrizione Tecnicahttps://www.wayne-dalton.com/Documents/fire-door-700-firestar-brochure.pdf

Relativo a

Materiale principaleAcciaio
Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectPorte - Porte e chiusure tagliafuoco
Clasificazione IFCPorta
Codice CSI MasterFormat 201408 33 23
Titolo CSI MasterFormat 2014Overhead Coiling Doors
Numero OmniClass23-17 11 31 11 13
Titolo OmniClassFire Rated Rolling Doors

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago