Pubblica i tuoi prodotti
QF Hose Adapter 18ga

QF Hose Adapter 18ga

Nordfab QF® Hose Adapters provide connection from Quick-Fit® (QF) ductwork to flex hose. Hose end is beaded to help retain hose with the hose clamp or bridge hose clamp.

For use with Nordfab flexible black rubber hose, clear rubber hose, or Static Dissipative Urethane Hose.

  • Available in galvanized steel and 304SS (as shown below) or optional 316SS or carbon steel
  • Available with flanged ends in diameters up to 72", and other various end types
  • Optional gauges standard 22 and 20, 16, 14 and 12

Contact Nordfab or your local Nordfab dealer for assistance with custom end types, larger sizes and material / gauge options.

Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Voce di capitolato
  • A. General Fabrication Requirements: Comply with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Ch. 3, "Round, Oval, and Flexible Duct," based on indicated static-pressure class unless otherwise indicated.

    1. Construct ducts of galvanized sheet steel unless otherwise indicated. 304SS Optional.
    2. Basis-of-Design Product: Subject to compliance with requirements, provide Nordfab Ducting, LLC; Quick Fit (QF) Duct.

      B. Connection Joints: Joint types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."

      1. Quick Fit Joints in Ducts 3 to 24 inches (76 to 510 mm) in diameter. Flange: Optional.
      2. Flanged Joints in All Ducts Greater than 24 inches (610 mm) in diameter.

      C. Longitudinal Seams: Seam types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Figure 3-2, "Round Duct Longitudinal Seams," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."

      1. Fabricated round ducts 3 to 24 inches (76 to 510 mm) in diameter to have laser-welded or plasma-welded longitudinal seams.
      2. Fabricated round ducts above 24 inches (610 mm) in diameter to have plasma-welded longitudinal seams.
    Specifiche tecniche
    • Rif. Unicoqf-hose-adapter-18ga
    • Famiglia di prodottoQuick-Fit Clamp Together Ducting
    • Gruppo di famigliaAdapters
    • TipoOggetto (oggetto singolo)
    • Data di pubblicazione2024-05-08
    • Numero di versione1
    Relativo a
    • Materiale principaleAcciaio zincato
    • Materiale secondarioStainless steel 304
    • Progettato inStati Uniti
    • Prodotto inStati Uniti
    Classificazioni
    • Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Raccolta della polvere
    • Clasificazione IFCRaccordo del condotto
    • Codice ETIMEG015540
    • Nome ETIMFittings, flanges and connectors
    • Codice Uniclass 2015Pr_65_65_25
    • Descrizione Uniclass 2015Ductwork and fittings
    • Codice CSI MasterFormat 201423 31 13.19
    • Titolo CSI MasterFormat 2014Metal Duct Fittings
    • Numero OmniClass23-33 49 00
    • Titolo OmniClassHVAC Ductwork

    Disponibilità Regionale

    Nord America
    Belize
    Bermuda
    Canada
    Costa Rica
    Isole Vergini britanniche
    Messico
    Panamá
    Porto Rico
    Saint Martin
    Stati Uniti