Pubblica i tuoi prodotti
Model H1011.8HO2, Chilled Wall Mount ADA Touchless Dual Fountain

Model H1011.8HO2, Chilled Wall Mount ADA Touchless Dual Fountain

Model H1011.8HO2, ADA vandal-resistant, wall mounted, touchless stainless-steel electric drinking fountain with 100% lead-free waterways. FOR INDOOR USE ONLY

Model H1011.8HO2 ADA vandal-resistant touchless electric drinking fountain provides 8 gph (30.3 L) chilled water performance in an engineered stainless-steel skin. This wall mounted swirl bowl designed fountain incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

  • Touchless operation for safety and peace of mind
  • Vandal resistant components include the bubblers, bowls, drains and bottom plates
  • 30-second obstruction time-out to reduce tampering of sensor
  • 18 gauge Type 304 Stainless Steel bowl assemblies mounted on 14 gauge Type 304 Stainless Steel wall brackets
  • 100% lead-free waterways
  • Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
  • Polished chrome-plated brass vandal-resistant bubbler heads with integral laminar anti-squirt flow eliminate water splash
  • Beautiful satin finish resists stains and corrosion

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) "NSF/ANSI/CAN 61: Q ≤ 1". Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Voce di capitolato
  • Model H1011.8HO2 electric vandal-resistant ADA wall mounted motion-activated drinking fountain shall include dual 18 gauge Type 304 Stainless Steel satin finish basins with integral swirl design, 14 gauge Type 304 Stainless Steel wall brackets, sensor operated stainless steel solenoid valves with 30-second obstruction time-out controlled by a transformer, 100% lead-free waterways, polished chrome-plated brass vandal-resistant bubbler heads with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainers, vandal-resistant bottom plates, stainless steel satin finish back panel and louvered intrusion-proof grill, high and low fountain mounting levels, and 1-1/4" O.D. (3.2 cm) waste pipes. The R-134a refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 L) of water at 50° F (10° C) cooled from 80° F (26.7° C) inlet water at 90° F (32.2° C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5   REQUIRES MODEL HCR8 AND MTGFR.LG PRICED SEPARATELY.

Specifiche tecniche
  • Rif. Unicohaws-H1011_8HO2
  • Famiglia di prodottoDrinking Fountains/Coolers
  • Gruppo di famigliaWall Mounted Drinking Fountains
  • TipoOggetto (oggetto singolo)
  • Data di pubblicazione2020-11-05
  • Numero di versione1
Relativo a
  • Materiale principaleAcciaio inossidabile
  • Progettato inStati Uniti
  • Prodotto inStati Uniti
Classificazioni
  • Categoria BIMobjectArticoli sanitari - Beverini
  • Clasificazione IFCTerminale sanitario
  • Nome UNSPSCSanitary ware
  • Codice UNSPSC301815
  • Codice Uniclass 2015Pr_40_20_87_24
  • Descrizione Uniclass 2015Drinking fountains
  • Codice CSI MasterFormat 201422 47 13
  • Titolo CSI MasterFormat 2014Drinking Fountains
  • Numero OmniClass23-31 31 00
  • Titolo OmniClassDrinking Fountains
  • Codice CSI UniFormat IID2010
  • Titolo CSI UniFormat IIPlumbing Fixtures

Disponibilità Regionale

Nord America
Canada
Stati Uniti