NKVE-Booster-sets

Name: NKVE-Booster-sets
Rating: 4.4 (10 reviews)

4.4(10 recensioni)

1, 2, 3, 4 NKVE 10, 15, 20, 32, 45 MCE-P are variable pressure units for residential building service and commercial building service. They can also be used in agriculture and in watering systems. NKVE are 1, 2, 3 or 4 multi-impeller vertical centrifugal pumps with coupling with MCE-P variable frequency drive installed as standard. The models with NKVE 10 S, 15 S, 20 S have the parts in contact with the liquid in AISI 304 stainless steel. The models with NKVE 32 and 45 have the pump body and upper flange in cataphorized cast iron. The impellers, diffusers and pump casing are in AISI 304 stainless steel. One control unit and one pressure sensor per units. Delivery check valve and expansion vessel for each pump. X version with materials in contact with water in stainless steel AISI 316. The units are supplied assembled, set and tested directly at the factory. IE3 electric motors. D.Connect ready (D.Connect Box supplied separately).

Voce di capitolato

1, 2, 3, 4 NKVE 10, 15, 20, 32, 45 MCE-P are variable pressure units for residential building service and commercial building service. Galvanized steel base. They can also be used in agriculture and in watering systems. There are 1, 2, 3 or 4 multi-impeller vertical centrifugal pumps with coupling with MCE-P variable frequency drive installed as standard. One control unit and one pressure sensor per units. Delivery check valve and expansion vessel for each pump. Suction and delivery manifolds in AISI 304 stainless steel. Possibility of remote control thanks to the D.Connect service (D.Connect Box supplied separately). The units are supplied assembled, set up and tested directly in the factory and complete with installation and maintenance instructions and test report of the test. The NKVE 10 S, 15 S and 20 S models have all the parts in contact with the liquid in stainless steel. Internal pump body, impellers and jacket in AISI 304 steel, diffusers in technopolymer. Removable mechanical seal in silicon carbide-graphite. It is possible to remove it without removing the motor, starting from the 5.5 kW models. The NKV 32 and 45 versions have the impellers, diffusers and jacket in AISI 304 stainless steel. Pump body and sealing port in cataphorized cast iron. Mechanical seal in removable silicon carbide-graphite without removing the motor starting from the 5.5 kW models. Available on request version X with materials in contact with water in AISI 316 stainless steel.

Specifiche tecniche

Rif. UnicoNKVE-Booster-sets
Famiglia di prodottoVSD Booster set
Gruppo di famigliaVSD Booster set
TipoMateriale di costruzione
Data di pubblicazione2020-12-17
Numero di versione1

Links

Link al Prodottohttps://www.dabpumps.com/en/products/pressure-units/electronic-pressure-units/1-2-3-4-nkve-10-15-20-32-45-mce-p
Istruzioni di installazionehttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_001359321.pdf
Certificazione di Prodottohttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_001359321.pdf
Descrizione Tecnicahttps://www.dabpumps.com/sites/default/files/document/60152203_1-2-3-4-NKVE_MCE_TS_ENG.pdf

Relativo a

Materiale principaleAcciaio
Materiale secondarioGhisa
Progettato inItalia
Prodotto inItalia

Classificazioni

Categoria BIMobjectImpianto idraulico - Pompe
Codice CSI MasterFormat 201422 11 23
Titolo CSI MasterFormat 2014Domestic Water Pumps
Codice CSI UniFormat IID2010
Titolo CSI UniFormat IIPlumbing Fixtures

Disponibilità Regionale

Europa
Albania
Andorra
Austria
Belgio
Bielorussia
Bosnia ed Erzegovina
Bulgaria
Cipro
Città del Vaticano
Croazia
Danimarca
Estonia
Finlandia
Francia
Germania
Gibilterra
Grecia
Guernsey
Irlanda
Islanda
Isola di Man
Isole Åland
Isole Faroe
Italia
Jersey
Lettonia
Liechtenstein
Lituania
Lussemburgo
Macedonia del Nord
Malta
Moldavia
Monaco
Montenegro
Norvegia
Paesi Bassi
Polonia
Portogallo
Regno Unito
Repubblica Ceca
Romania
Russia
San Marino
Serbia
Slovacchia
Slovenia
Spagna
Svalbard e Jan Mayen
Svezia
Svizzera
Ucraina
Ungheria