EVOSTA 2/SAN

APPLICATIONS Low energy consumption electronic pump for water circulation in all types of domestic heating and cooling systems. ADVANTAGES The new range of EVOSTA 2 circulators by DAB combines the strength of an mechanical circulator with the benefits of the electronic circulator. Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI ≤ 0.18, as well as the protection class IPX5 and the integrated bleeding plug, the EVOSTA 2 family ranks as one of the best products in the category in terms of performance and reliability. The range of EVOSTA 2 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary. CONSTRUCTION FEATURES Cast iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on graphite bushings lubricated by the pumped liquid. Stainless steel rotor liner, stator liner and closing flange. Ceramic thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection. CONTROL PANEL The settings of the EVOSTA 2 circulators can be modified in the control panel on the facia of the pump device. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

Voce di capitolato

TECHNICAL DATA Operating range: 0,4-3,6 m3/h with head up to 6,9 metres. Pumped liquid temperature range: from -10 °C to +110°C Working pressure: 10 bar (1000 kPa) Protection class: IPX5 Insulation class: F Installation: with horizontal motor axis Standard power input:: single-phase 1x230 V~ 50/60 Hz Pumped liquid Clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%).

Specifiche tecniche

Rif. UnicoEVOSTA-2-SAN
Famiglia di prodottoCirculators
Gruppo di famigliaWet Rotor Electronic Circulators
TipoOggetto (oggetto singolo)
Data di pubblicazione2018-03-11
Numero di versione1

Links

Link al Prodottohttps://www.dabpumps.com/en/products/circulators/wet-rotor-electronic-circulators/evosta-2
Istruzioni di installazionehttps://dabpumps.com/sites/default/files/qrcode_pdf/60187640_EVOSTA2-3-2SOL.pdf
Descrizione Tecnicahttps://www.dabpumps.com/sites/default/files/document/60187311_NEW%20EVOSTA%202-3_TS_ENG.pdf

Relativo a

Materiale principaleGhisa
Materiale secondarioPlastica
Progettato inItalia
Prodotto inItalia

Classificazioni

Categoria BIMobjectImpianto idraulico - Pompe
Clasificazione IFCRaccordo tubo
Codice ETIMEC010980
Nome ETIMBuilt-in circulation pump
Nome UNSPSCCirculating pumps
Codice UNSPSC40151504
Codice Uniclass 2015Pr_65_53
Descrizione Uniclass 2015Pump products
Codice CSI MasterFormat 201422 35 23
Titolo CSI MasterFormat 2014Circulating, Domestic Water Heat Exchangers
Numero OmniClass23-27 17 00
Titolo OmniClassPumps
Codice CSI UniFormat IID2020
Titolo CSI UniFormat IIDomestic Water Distribution

Disponibilità Regionale

Europa
Albania
Andorra
Austria
Belgio
Bielorussia
Bosnia ed Erzegovina
Bulgaria
Cipro
Città del Vaticano
Croazia
Danimarca
Estonia
Finlandia
Francia
Germania
Gibilterra
Grecia
Guernsey
Irlanda
Islanda
Isola di Man
Isole Åland
Isole Faroe
Italia
Jersey
Lettonia
Liechtenstein
Lituania
Lussemburgo
Macedonia del Nord
Malta
Moldavia
Monaco
Montenegro
Norvegia
Paesi Bassi
Polonia
Portogallo
Regno Unito
Repubblica Ceca
Romania
Russia
San Marino
Serbia
Slovacchia
Slovenia
Spagna
Svalbard e Jan Mayen
Svezia
Svizzera
Ucraina
Ungheria