CaptiveAire

Heat & Condensate Exhaust Only Vent Hood, VH1 Series

Name: Heat & Condensate Exhaust Only Vent Hood, VH1 Series
Rating: 3.6 (5 reviews)

3.6(5 recensioni)

VH1 Series

Heat & Condensate Exhaust Hood
The VH1 Series is a Type II, Exhaust Only Hood to be used over equipment not producing grease laden vapors. Type II hoods are used for condensation or heat removal applications.

ADVANTAGES

Superior Exhaust Flow Rates:
Construction: Single wall type hood fabricated of Type 304 stainless steel, #3 or #4 polish, on all exposed surfaces when used in condensate applications. Type 430 stainless steel, #3 or #4 polish available when used for heat applications. Pre-punched hanging angles on each end of hood. Additional set provided for hoods longer than 12'.
Condensate Applications: Integral 4-sided perimeter gutter and one drain standard for high-moisture exhaust.
Optional Double Wall Front: Used when switches are needed on the face of the hood. Mechanical baffle provides a built-in wiring chase for optimal positioning of electrical controls and outlets on the front face of the hood.
Optional Make-Up Air: Up to 80% make-up air can be supplied through optional front and/or side plenums (PSP Accessory).
Optional Enclosure Panels: Constructed of stainless steel. Sized to extend from hood top to ceiling, enclosing pipe and hanging parts.

PERFORMANCE
ConfigurationLight Load Exhaust CFM/ftHeavy Load Exhaust CFM/ftWall & 1-piece island 100 150

CERTIFICATIONS
The VH1 Model has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. and Canadian products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

Models VH1 are ETL Listed under file number 3186625SAT-001 and complies with UL710, ULC710 and ULC-S646 Standards.

Specifiche tecniche

Rif. Unicocaptiveaire-040
Famiglia di prodottoHVAC
Gruppo di famigliaHood and Ventilation Equipment
TipoOggetto (oggetto singolo)
Data di pubblicazione2012-09-26
Numero di versione1

Links

Link al Prodottohttp://www.captiveaire.com/catalogcontent/hoods/vh/index.asp?catid=182

Relativo a

Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Ventilazione meccanica
Codice Uniclass 2015Ss_65_40_33_51
Descrizione Uniclass 2015Mechanical supply ventilation systems
Codice CSI MasterFormat 201423 00 00
Titolo CSI MasterFormat 2014Heating, Ventilating, and Air Conditioning (HVAC)
Numero OmniClass23-33 00 00
Titolo OmniClassHVAC Specific Products and Equipment
Codice CSI UniFormat IID30
Titolo CSI UniFormat IIHVAC

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago